Structure Browser - Administration Guide : New Search Experience

21 March 2016

1. New Search Experience

This chapter contains information on how to configure different aspects of the new search experience.

1.1. Introduction

The new search allow users a way to find objects of interest. With the new search, search can be configured within a page. Search side panel form allow users a way to easily find objects of interest and load search result into flat table. To launch new search you need to create a new command and add it to the Menu of your choice that is visible in your applications.

New Search supports usage of Search Providers This means that ENOVIA, EXALEAD or other data source can be used to find relevant information.

image
Figure 1. Search Based Table

1.1.1. Configuration

The new search is launched from command. The URL for new search command is shown below:

${ROOT_DIR}/tvc-action/searchBasedTable

This URL supports following parameters:

Parameters
Parameter Description Example

searchConfig

Name of the search configuration. It is used to configure behaviour of the search.

<Param name="searchConfig" value ="tvc:searchv2:tvx:common/SearchV2Config.xml"/>

pageConfig

Name of the page configuration. A page configuration is used to configure behaviour of the Structure Browser.

<Param name="pageConfig" value="tvc:pageconfig:tvx:misc/MyParts.xml" />
Example Configuration
<Command>
    <Label>SearchBasedTable</Label>
    <URL action="searchBasedTable">
    <Param name="searchConfig" value ="tvc:searchv2:tvx:common/SearchV2Config.xml"/>
    <Param name="pageConfig" value="tvc:pageconfig:tvx:misc/MyParts.xml" />
    </URL>
</Command>
Configuration Format

The new search configuration files are placed inside the folder searchv2. The root element of the configuration is <search> and the following child elements are supported:

Name Description Example

Limit

The maximum number of search results returned.

Search Limit can be used to limit the search results. Initial value gets populated from search config. 
<Limit>100</Limit>

upperSearchLimitValue

The maximum number of search results allowed to be displayed.

upperSearchLimitValue can be used to limit the maximum search results. Default value is set as 1000. Limit can be only between 1 and the upperSearchLimitValue.
For Index based searches like Exalead, search limit becomes page size and hence this upper search limit will become maximum page size. 
<Settings>
	<Setting name="upperSearchLimitValue" value="1000" />
</Settings>

DataFields

The data to include for the search result. For example, type, name, revision and current state.

 
<DataFields>
    <DataField>type</DataField>
    <DataField>name</DataField>
    <DataField>${attribute[attribute_MaterialCategory]}</DataField>
</DataFields>

SearchForm

Search form which allows the user to further filter down the search result.

See Search Form for more details.

 
<SearchForm ref="tvc:searchformv2:tvx:search/SearchV2Form.xml" />
OR
<SearchForm name="tvc:searchformv2:tvx:search/SearchV2Form.xml" />

SearchOnCriteriaUpdate

Controls if the search is submitted when the search criteria is updated.

For example, after the user has selected state "Released" in the search form or search for "00230" in the term field a search is submitted and the search result is displayed.

This setting is useful when using indexing engine as search provider. The search is debounced to 1000ms. However, we can change this limit with 'searchDebounceMs' setting.

On clearing the search criteria through clear button, the search will not be initiated on modern browsers. However, it will be initiated on IE11 due to some restrictions. 
<SearchOnCriteriaUpdate>true</SearchOnCriteriaUpdate>

searchDebounceMs

When searchOnCriteriaUpdate is set to true, this setting is used to debounce the submit of search for specified number of milliseconds after the criteria have been updated.

 
<Settings>
    <Setting name="searchDebounceMs" value="2000" />
</Settings>

Settings

Additional settings for the search. These settings are accessible in SearchProvider and can be used while performing search.

 
<Settings>
    <Setting name="name-of-setting" value="the-value" />
    <Setting name="another-setting" value="another-value" />
</Settings>

applyCriteriaWithoutField

With this setting it will be possible to apply fields which are not present in the searchform. This setting will be useful when there are conditional fields like classification fields which are added on the searchform after search is performed. These conditional fields are not part of original searchform and will not get applied on save search unless this setting is set to true. Default value is false.

 
<Settings>
    <Setting name="applyCriteriaWithoutField" value="true" />
</Settings>

OpenOnLoad

Controls if the search panel should be opened by default on load. Default value is false.

When user opens or closes search panel, it will be remembered. Based on last user action, search panel will either be opened or closed. 
<OpenOnLoad>true</OpenOnLoad>

retrieveFieldsOnCriteriaUpdate

Defines whether conditional fields on searchform should be loaded without performing search.

When SearchOnCriteriaUpdate is set to true this setting will be ignored and search form will be updated after search is performed. 
<Settings>
    <Setting name="retrieveFieldsOnCriteriaUpdate" value="true" />
</Settings>
Example Configuration
<Search provider="enovia">
	<Limit>500</Limit>
	<SearchOnCriteriaUpdate>true</SearchOnCriteriaUpdate>
	<OpenOnLoad>true</OpenOnLoad>
	<SearchForm name="tvc:searchformv2:tvx:search/SearchV2Form.xml" />
	<DataFields>
		<DataField>type</DataField>
		<DataField>name</DataField>
		<DataField>revision</DataField>
		<DataField>description</DataField>
		<DataField>modified</DataField>
		<DataField>primaryimage</DataField>
		<DataField>owner</DataField>
		<DataField>policy</DataField>
		<DataField>current</DataField>
		<DataField>attribute[Weight]</DataField>
	</DataFields>
	<Settings>
		<Setting name="termWhere"
			value="name ~~ '*%s*' OR description ~~ '*%s*'" />
	</Settings>
</Search>
Validations
Search Limit

Validations are in place for search limit to ensure that search limit value must be non-empty, non-negative, numeric value and between 1 & the upper search limit value.

image
Figure 2. search limit validation

1.1.2. Search Form

Form Configuration Format

The searchform configuration files are placed inside the folder searchformv2. The root element of the configuration file is <SearchForm> and the following child elements are supported:

Name Description Example

Title

Title of the search form. Displayed above the fields.

 
<Title>Part Search</Title>

Fields

Available fields in the search form.

See Field Configuration Format for details on how to configure each field.

 
<Fields>
    <Field>
        <Label>Name</Label>
        <DataField>name</DataField>
    </Field>
</Fields>

Toolbar

Add toolbar in the search form. See Toolbar Configuration Format for details on how to configure each Toolbar.

 
<Toolbar>
    <SaveSearch/>
    <LoadSearch/>
</Toolbar>

Sections

Group fields into collapsible sections in the search form.

See Section Configuration Format for details on how to configure a section.

 
<Sections>
	<Section id="basic">
		<Label>Basic</Label>
		<Tooltip>
			<Title>Basic Fields</Title>
			<Content>This is a section for basic fields.</Content>
		</Tooltip>
		<Expanded>true</Expanded>
	</Section>
</Sections>

OnCreate

Trigger executed when the search form has been created. Useful to manipulate the search form, e.g. updating field values or changing order of fields, before it’s sent to the client.

Specify the Java class name containing the custom logic using the attribute className. Interface the Java class needs to implement:

com.technia.tvc.search.searchform.examples.SearchFormEvents
 
<OnCreate className="com.acme.SearchFormEvents" />
Toolbar Configuration Format

Toolbar can be configured inline within a searchform.

image
Figure 3. SearchForm Toolbar
Toolbar Command Name Description Example

SaveSearch

The in-built command will allow users to save search form criteria to be used again later on

 
<Toolbar>
    <SaveSearch />
</Toolbar>

LoadSearch

The in-built command will allow users to load the saved search or search directly by clicking on the search icon

 
<Toolbar>
    <LoadSearch />
</Toolbar>
Field Configuration Format

Field can be configured inline within a searchform or it can be configured in a separate file. The field configuration files are placed inside the folder searchformfield. If configured in a separate file, it can be referred within searchform using attribute ref as below -

<Fields>
    <Field ref="tvc:searchformfield:acme:common/Name.xml"/>
    <Field ref="tvc:searchformfield:acme:common/Modified.xml"/>
</Fields>

The root element is <Field> and the following child elements are supported:

Name Description Example

Label

The label for the field. I18n is supported through string resources file.

 
<Label>Type</Label>

RegisteredSuite

Registered suite for label localization when string defined in Enovia string resource properties file.

 
<RegisteredSuite>EngineeringCentral</RegisteredSuite>

Required

Specifies that a value is required for the field in order for the form to be valid. Alert toaster message will display only when user click on search button.

Note: In case of "SearchOnCriteriaUpdate", search would be blocked but user would not be shown any alert message.

 
<Required>true</Required>

Tooltip

Tooltip for the field. Displayed when hovering the label.

 
<Tooltip>
    <Header>Type Selection</Header>
    <Content>Select the type by entering its name and select it from the list.</Content>
</Tooltip>

DataField

The data to search among.

The search provider might use this in different ways. See specific Search Providers for details about it.

For example the ENOVIA Search Provider users standard statement as type, name, attribute[Material Category].

ENOVIA example:

<DataField>type<DataField/>

EXALEAD example:

<DataField>ATTRIBUTE_MATERIAL_CATEGORY</DataField>

DataType

Type of data to be searched. Valid values:

  • string

  • date

  • integer

  • decimal

  • boolean

 
<DataType>date</DataType>

UIType

Kind of user interface user presented to the user. For example, autocomplete, ranges and text.

See UI Types for more details.

 
<UIType>autocomplete</UIType>

Visible

Defines visibility of field in search form. It allows configuration to make field visible or hidden based on selection on another field. By default field is visible.

 
<Visible ifField="enovia_type">
    <HasValues>
        <Value>Part</Value>
    </HasValues>
</Visible>

Values

Values available for the field. For example, when ranges for an ENOVIA attribute is displayed each of the ranges is represented by one value.

It also controls the default selected value.

See Values for more details.

Use ranges on attribute Material Category as values:

<Values attribute="attribute_MaterialCategory" />

Part is the default value:

<Values>
    <Value value="type_Part" default="true" />
</Values>

Settings

Settings to further configure the field. Look at each UI Type for details on supported settings.

Enabling the search box above the values when using <UIType>ranges</UIType>:

<Settings>
    <Setting name="showFilter" value="true" />
</Settings>

casesensitive

case sensitivity for the input value. Default value is false

 
<Settings>
    <Setting name="casesensitive" value="true" />
</Settings>

ConditionalFields

Additional fields which should be added to search form based on value selected for this field. See Conditional Fields for details.

 
<Field>
    .
    .
    <ConditionalFields className="com.acme.MyConditionalFieldsProvider" />
</Field>

The ENOVIA attribute can be specified on the <Field> element using the attribute attribute. This specifies that the field is searching in that specific attribute and sets sensible default values for the field, e.g. it picks <UIType>date</UIType> and sets <DataType>date</DataType> in case the attribute stores a date.

Example:

<Field attribute="attribute_MaterialCategory" />
Specifying the attribute is useful when searching for with for example EXALEAD. The attribute is used to get the correct UI Type etc.
Values

Values are used for two purposes:

  1. To define the values the user can search by

  2. To define the value which is selected by default

There are a number of ways to control the available values:

  1. Configure a predefined list of values, see below for configuration format

  2. Specify an attribute using the attribute attribute. Example:

    <Values attribute="attribute_MaterialCategory" />

  3. Write a ValueProvider and configure it using the attribute className, Example:

    <Values className="com.acme.MyValueProvider" />
Value Configuration Format

The <Values> and <Value> elements are used when configuring a predefined list or specifying default values for a field.

Attribute Name Description Example

value

The value. It’s mandatory to specify it.

 
<Values>
    <Value value="Part" />
</Values>

label

Text presented to the user. If none is provided the value is displayed. Label also supports localization.

 
<Values>
    <Value value="Part" label="Le Part" />
    <Value value="Document" label="com.technia.tvc.search.form.type.document" />
</Values>

type

Type of the value, if it is Enovia specific value like type, attribute range, state. For example if value is attribute range, its type should be <AttributeName>.Range. This is used for applying localization on said value and it is based on localization of schema elements in Enovia.

 
<Values>
    <Value value="Part" type="Type" />
    <Value value="Rubber" type="Material_Category.Range" />
</Values>

default

Controls if the value is selected by default.

 
<Values>
    <Value value="Part" default="true" />
</Values>
Conditional Fields

Additional fields can be added to search form based on value selected on this field. For example it may be desired for type field to add additional fields when Part is selected as type.

Conditional Fields can be implemented by implementing an interface com.technia.tvc.search.searchform.conditionalfields.ConditionalFieldsProvider and configure it using the attribute className, Example:

<ConditionalFields className="com.acme.MyConditionalFieldsProvider" />
API Description

createConditionalFields

Returns set of additional fields to be added to searchform
Field Visibility

Field can be shown or hidden based on selection made on another field. It can be useful to configure use case when different attributes or fields are enabled for searching based on type selected. For example when type is selected as 'Part', part attributes like 'Weight' can be shown.

The <Visible> element within <Field> is used for configuring visibility rules for the field. Following attributes and sub elements can be used for configuration.

Name Element / Attribute Description Example

hidden

attribute

Defines whether field should be hidden by default.

 
<Visible hidden="true"/>

ifField

attribute

Defines id of field on which visibility of this field depends. For example if 'Weight' field is to be shown when 'Type' field has value Part.

 
<Visible fieldId="type_enovia"/>

HasValues

element

Defines discrete list of values, on which field will be visible.

 
<HasValues>
    <Value>Hardware Part</Value>
    <Value>Electrical Part</Value>
    <Value>Mechanical Part</Value>
</HasValues>

includeWhenHidden

attribute

Defines whether field should be considered in search criteria, when field is not visible.

 
<Visible hidden="true" includeWhenHidden="true"/>
Examples

Example configuration to show part states when type selected is Part.

<Field id="partstates">
    <Values>
        <Value value="Review" default="true"/>
        <Value value="Preliminary"/>
    </Values>
    <Label>Part States</Label>
    <DataField>current</DataField>
    <Visible ifField="enovia_type">
        <HasValues>
            <Value>Part</Value>
        </HasValues>
    </Visible>
</Field>
Custom Fields

Custom field definition can also be used to implement a field. It can be specified using attribute className on element Field.

Interface to implement:

com.technia.tvc.search.searchform.FieldDef

<Field className="com.acme.search.CustomField"/>
Built-in ENOVIA Fields
TypeField

Field designed to select an ENOVIA type. The field uses autocomplete. Available types to search among is configurable using the SearchableTypes element.

Example configuration of a TypeField where the user can select any type in either Parts or Document hierarchy. The default value is set to 'Part':

<TypeField>
    <Values>
        <Value value="Part" default="true" />
    </Values>
    <SearchableTypes>
        <Type>type_Part</Type>
        <Type>type_DOCUMENTS</Type>
    </SearchableTypes>
</TypeField>
RevisionField

Field designed to select an ENOVIA revision. The field uses radio button type. Available values to search among is configurable using provided tags.

Example configuration of a RevisionField where the user can select any revision in either Parts or Document hierarchy. The default value is set using selected="true" attribute:

<RevisionField sectionId="basic">
    <AnyRevision />
    <FirstRevision />
    <LastRevision />
    <LatestInState policy="EC Part" state="Release" />
    <LastAndLatestInState policy="EC Part" state="Release" />
</RevisionField>
Field Description

AnyRevision

Shows all the revisions

FirstRevision

Shows only first revision

LastRevision

Shows only last revision

LatestInState

Shows latest revision with passed in state value

LastAndLatestInState

Shows the combination of LastRevision and LatestInState
NameField

This field uses a text input field and looks in the name field in ENOVIA.

Example:

<NameField />
PersonField

Field used to select a person. The field uses autocomplete.

Example:

<PersonField>
    <Label>Owner</Label>
    <DataField>owner</DataField>
</PersonField>

To make the default value equal to the name of the user currently logged in, the following setting can be applied on the element:

<Settings>
    <Setting name="currentUserDefault" value="true" />
</Settings>
StateField

Field used to select one or more states. The available states to choose from is configured by specifying one or more policies.

It’s mandatory to specify at least one policy.

Example where the user can select states from the EC Part and / or Development Part policy:

<StateField>
    <Policies>
        <Policy name="EC Part" />
        <Policy name="Development Part" />
    </Policies>
</StateField>

The states are by default grouped by policy. The groups are expanded / collapsed when clicked. Clicking the label of the field expands / collapses all groups.

Tip: Use the setting expandGroups to control if the polices should be expanded / collapsed when the search form is loaded.

The StateField uses the UI type ranges. The settings described in the settings table of the UI type ranges is available for the StateField. For example, it’s possible to add the filter feature and control if the groups should be expanded when the search form is loaded. Two settings are not available: showAllRanges and showRangeAmount. All ranges are shown for the StateField.

Settings:
Attribute Name Description Default Example

groupByState

Groups the states into their corresponding policies.

true

 
<Settings>
    <Setting name="groupByState" value="false" />
</Settings>

valueSeparator

The separator to use in the value to separate the policy and state name.

For example, the value of state Preliminary for policy EC Part is EC Part:Prelimiary

:

 
<Settings>
    <Setting name="valueSeparator" value="@" />
</Settings>
ClassificationField

ClassificationField is a Enovia built-in field designed as preconfigured field to support Enovia classification hierarchy. In Enovia, classification is maintained as hierarchy where Library objects act as root objects. There can be single or multiple root Library objects, beneath a Library there are Family or Classification objects. There can be single or multiple Family or Classification objects below each Library object. There can be more Family or Classification objects (also known as Sub Family) beneath a Family or Classification object forming a hierarchy. At the end of hierarchy classified items will be present.

ClassificationField has a built in autocomplete handler which allows navigation through Library, Family and Sub Family or Classification objects. Handler also allows configurations on root Library and Family objects, more details can be found here Built-in Autocomplete Handler.

Once user selects a Family or Classification, built-in ConditionalFields loads attributes dynamically into searchform, see Built-in Conditional Fields for details.

Example:

<ClassificationField>
    <Label>Part Family</Label>
    <DataField>to[Classified Item].from.id</DataField>
    <ConditionalFields></ConditionalFields>
    <Settings>
        <Setting name="defaultsToContextObject" value="true" />
        <Setting name="autocompletehandler">
        {
            "name": "classification",
            "rootTypePattern": "type_Libraries",
            "rootVaultPattern": "vault_eServiceProduction",
            "rootWhereClause": "current === Active",
            "expandTypePattern": "type_PartFamily",
            "relPattern": "relationship_Subclass",
            "expandWhereClause": "current === Active",
            "queryType": "expandWithTerm",
            "displayMacro":"${name} ${current}"
        }
    </Setting>
    <Setting name="defaultMinInteger" value="0" />
    <Setting name="defaultMaxInteger" value="1000" />
    <Setting name="defaultMinReal" value="0.0" />
    <Setting name="defaultMaxReal" value="100.0" />
    </Settings>
</ClassificationField>
Settings:
Setting Name Description Example

defaultsToContextObject

Context object is set as default selected in field. Useful when search panel is open in object context and it expected to default to context object. Default is false.

 
<Settings>
    <Setting name="defaultsToContextObject" value="true" />
</Settings>

defaultMinInteger

Minimum value for integer type attribute when added dynamically via Classification Field.

 
<Settings>
    <Setting name="defaultMinInteger" value="0" />
</Settings>

defaultMaxInteger

Maximum value for integer type attribute when added dynamically via Classification Field.

 
<Settings>
    <Setting name="defaultMaxInteger" value="1000" />
</Settings>

defaultMinReal

Minimum value for a real type attribute when added dynamically via Classification Field.

 
<Settings>
    <Setting name="defaultMinReal" value="1.0" />
</Settings>

defaultMaxReal

Maximum value for real type attribute when added dynamically via Classification Field.

 
<Settings>
    <Setting name="defaultMaxReal" value="100.0" />
</Settings>
Built-in Autocomplete Handler

Classification built-in handler retrieves Family objects in two steps -

  1. Query Library objects

  2. Expand Library objects to retrive Family objects

Example:

<Setting name="autocompletehandler">
    {
        "name": "classification",
        "rootTypePattern": "type_Libraries",
        "rootVaultPattern": "vault_eServiceProduction",
        "rootWhereClause": "current === Active",
        "expandTypePattern": "type_PartFamily",
        "relPattern": "relationship_Subclass",
        "expandWhereClause": "current === Active",
        "queryType": "expandWithTerm",
        "displayMacro":"${name} ${current}"
    }
</Setting>

Following arguments provide flexibility in retrieving Library and Family or Classification objects.

Argument Description Default Example

rootTypePattern

TypePattern of top level Library.

type_Library

 
<Setting name="autocompletehandler">
    {
        "name": "classification",
        "rootTypePattern": "type_Libraries"
    }
</Setting>

rootNamePattern

NamePattern of top level Library.

*

 
<Setting name="autocompletehandler">
    {
        "name": "classification",
        "rootNamePattern": "Part*"
    }
</Setting>

rootRevPattern

RevisionPattern of top level Library.

*

 
<Setting name="autocompletehandler">
    {
        "name": "classification",
        "rootRevPattern": "A"
    }
</Setting>

rootVaultPattern

VaultPattern of top level Library.

*

 
<Setting name="autocompletehandler">
    {
        "name": "classification",
        "rootVaultPattern": "eService Production"
    }
</Setting>

rootWhereClause

Where clause for querying Library objects.

 
<Setting name="autocompletehandler">
    {
        "name": "classification",
        "rootWhereClause": "current === Active",
    }
</Setting>

relPattern

Relationship pattern for expanding Library objects

relationship_Subclass

 
<Setting name="autocompletehandler">
    {
        "name": "classification",
        "relPattern": "relationship_Subclass*"
    }
</Setting>

expandTypePattern

Type pattern for Family or Classification objects.

type_PartFamily

 
<Setting name="autocompletehandler">
    {
        "name": "classification",
        "expandTypePattern": "type_PartFamily*"
    }
</Setting>

expandWhereClause

Where clause for expanding Family or Classification objects.

 
<Setting name="autocompletehandler">
    {
        "name": "classification",
        "expandWhereClause": "current === Active"
    }
</Setting>

queryType

Following four options are supported:

  • queryWithTerm: Library objects will be queried first as per setting defined and expanded to retrieve Family objects. User input will be applied as where while finding Family objects.

  • expandWithTerm: Library objects passed as argument or context object will be expanded to retrieve Family objects. User input will be applied as where while finding Family objects.

  • query: Library objects will be queried first as per setting defined and expanded to retrieve Family objects. User input will not be considered.

  • expand: Library objects passed as argument or context object will be expanded to retrieve Family objects. User input will not be applied.

query

 
<Setting name="autocompletehandler">
    {
        "name": "classification",
        "queryType": "expandWithTerm",
    }
</Setting>

searchType

Defines how user input should be used in finding Family objects. Valid values are:

  • startswith

  • endswith

  • contains

startswith

 
<Setting name="autocompletehandler">
    {
        "name": "classification",
        "searchType": "startswith"
    }
</Setting>
Auto setting default value on field

The New Search Experience (NSX) in TVC allows user to find objects of interest by configuring the search within a page. NSX comes with side panel for search and the results are displayed in a flat table. NSX supports search providers - Enovia, Exalead or other data source.

When NSX form gets loaded, the fields can be pre-populated with their default values.

However, it might be needed that these default values are not pre-selected but can be added with a single click. For example, for a person field, the default value can be logged in user, but the user may not want to prefill but instead want to set on click on the icon. We have now added a new feature of setting the default value by clicking an icon This feature is only applicable for an auto-complete field. This can be enabled by using the below settings :

<Settings>
    <Setting name="currentUserDefault" value="true" />
    <Setting name="setToDefaultOnIconClick" value="true" />
    <Setting name="populateDefaultValueIcon" value="ti-c ti-person-c" />
    <Setting name="populateDefaultValueIconTooltip" value="Click to set context user" />
</Settings>

The icon and its tool tip are configurable. The tooltip also supports localization.

image
Figure 4. NSX-Icon to set default value
Built-in Conditional Fields

Classification built-in conditional field add interface attributes from selected Classification/Family object to searchform.

Example:

<ClassificationField>
    .
    .
    <ConditionalFields></ConditionalFields>
    .
</ClassificationField>

It is also possible to use custom conditional fields, see Conditional Fields for details.

UI Types

For each field a UI type is configured. It defines what kind of user interface that is presented to the user. Is it a simple text input field, datepicker, autocomplete field where data is fetched from the server or some other kind of UI.

If no UI type is configured for a field a (hopefully) sensible decision is done
Text

A simple input field where a user can enter a text.

Suitable for example when searching in name and description in ENOVIA.

Autocomplete

Autocomplete field aiding the user to select a value. As the user enters a value the available values are presented in a dropdown.

There are two ways to specify the values the user can choose from:

  1. Predefined list of values. Configure the available values using the Values element. The values are sent to the client when the search form is rendered and no later requests to the server is required.

  2. AutoCompleteHandler. Specify which AutoCompleteHandler which should provide values, e.g. type or person. When the user enters a search term a request is sent to server for evaluating suitable values.

Configure which AutoCompleteHandler to use and other settings using a <Setting> with the name set to autocompletehandler.

Example configuring a field to use the type AutoCompeleteHandler:

<Field>
    <Label>Type</Label>
    <DataField>type</DataField>
    <UIType>autocomplete</UIType>
    <Settings>
        <Setting name="autocompletehandler">
        {
            "name": "type",
            "rootTypes": [ "Part" ]
        }
        </Setting>
    </Settings>
</Field>
This is quite close to what is done behind the scenes when using the Built-in TypeField

More information about AutoCompleteHandlers is found in the TVC Classic Core documentation.

The react-select component is used to provide the autocomplete feature. Settings available in the documentation is possible to configure using the <Setting value="reactselect"> element.

Example:

<Setting name="reactselect">
{
    getOptionValue: (option) { return option.id; },
    getOptionLabel: (option) { return option.login; }
}
</Setting>
Multi Value Selection

React select supports selection of multiple values, to enable isMulti setting should be set to true using the <Setting name="reactselect"> element as shown below.

<Setting name="reactselect">
     {
         "isMulti": "true"
     }
</Setting>
Ranges

Presents a fixed number of ranges to the user. This could for example be the ranges of an ENOVIA attribute or a number of states.

The available ranges to choose from is specifid using the Values element.

Example displaying ranges for the Material Category attribute:

<Field>
    <Label>Material Category</Label>
    <DataField>ATTRIBUTE_MATERIAL_CATEGORY</DataField>
    <UIType>ranges</UIType>
    <Values attribute="attribute_MaterialCategory" />
</Field>
Settings:
Attribute Name Description Default Example

showFilter

Show input field above ranges used to filter visible ranges.

false

 
<Settings>
    <Setting name="showFilter" value="true" />
</Settings>

showAllRanges

If all ranges should be shown. User will need to scroll in case this setting is false.

false

 
<Settings>
    <Setting name="showAllRanges" value="true" />
</Settings>

showRangeAmount

Number of ranges to show in case showAllRanges is false.

5

 
<Settings>
    <Setting name="showRangeAmount" value="10" />
</Settings>

expandGroups

Controls if the groups should be expanded when the search form is loaded. Useful in case there are a large amount of groups / ranges.

true

 
<Settings>
    <Setting name="expandGroups" value="false" />
</Settings>

hideRangesWithZeroCount

Controls if ranges with count zero should be hidden.

false

 
<Settings>
    <Setting name="hideRangesWithZeroCount" value="true" />
</Settings>
The count for each range is displayed in case that information is available in the provided values
Try exchanging the UIType to autocomplete to see if it fits better for your needs
Date Picker

The user can select a date range to search within. If only start / end is selected all objects after / before the date is displayed.

Example:

<Field>
    <Label>Modified</Label>
    <DataField>modified</DataField>
    <UIType>datepicker</UIType>
</Field>
The UI type is redundant in the example above. As modified is specified on the field element sensible default values for the field are applied. For example, the UIType is set to datepicker as modified has the data type date.

The react-daterange-picker component is used to provide the datepicker feature. Settings available in their documentation is possible to configure by adding a <Setting> with the name reactdates.

Example configuring react-dates to display three months in the picker and remove the clear button:

<Field>
    <Label>Modified</Label>
    <DataField>modified</DataField>
    <UIType>datepicker</UIType>
    <Settings>
        <Setting name="reactdates">
        {
            "numberOfMonths": 3,
            "showClearDates": false
        }
        </Setting>
    </Settings>
</Field>

Settings:

Attribute Name Description Default Example

valuesInclusive

Includes the specified ‘from’ and ‘to’ values

true

 
<Settings>
    <Setting name="valuesInclusive" value="false" />
</Settings>

dateDisplayFormat

Date Format to be used for this field. Input format based on Unicode Technical Standard. Supported values are: y, M, MM, MMM, MMMM, d, dd.

'd-M-y'

 
<Settings>
    <Setting name="useOldDatePicker" value="false" />
</Settings>

useOldDatePicker

Displays older date picker for selection (depreciated)

false

 
<Settings>
    <Setting name="useOldDatePicker" value="true" />
</Settings>
The old date picker using the setting useOldDatePicker is depreciated and might get removed in future releases.
Slider

Used to define a number range to search within. Useful when searching for instance of Parts with weight between 12 and 30 grams.

A slider is displayed to allow the user to easily adjust the range.

Example configuration:

<Field attribute="attribute_Weight">
    <Label>Weight</Label>
    <UIType>Slider</UIType>
    <Settings>
        <Setting name="unit" value="g" />
        <Setting name="min" value="0" />
        <Setting name="max" value="100" />
    </Settings>
</Field>
The UI type is redundant in the example above. As the attribute weight is specified on the field element sensible default values for the field are applied. For example, the UIType is set to slider as weight contains numeric values.
Settings:
Attribute Name Description Default Example

showSlider

Should the slider be displayed

true

 
<Settings>
    <Setting name="showSlider" value="false" />
</Settings>

min

The minimum value that is selectable. This setting is mandatory in case the slider is displayed.

 
<Settings>
    <Setting name="min" value="0" />
</Settings>

max

The maximum value that is selectable. This setting is mandatory in case the slider is displayed.

 
<Settings>
    <Setting name="max" value="100" />
</Settings>

unit

A unit to display next to the input fields, e.g. $ and g.

 
<Settings>
    <Setting name="unit" value="$" />
</Settings>

step

Increments when changing the value using the slider.

1

 
<Settings>
    <Setting name="step" value="0.1" />
</Settings>

precision

Decimal precision for the field.

1

 
<Settings>
    <Setting name="precision" value="3" />
</Settings>

valuesInclusive

Includes the specified ‘from’ and ‘to’ values

true

 
<Settings>
    <Setting name="valuesInclusive" value="false" />
</Settings>
Term Field

Term field is special field designed to be used for search overlay. Implementing Search Provider can decide on how to interpret term field and use for performing search. See Enovia Provider Settings for details on how built-in ENOVIA Search Provider uses term field. Term field can be identified by property FieldType as term on field.

Section Configuration Format

The root element is <Section> and the following child elements and attributes are supported:

Name Description Example

id

Attribute on <Section> tag.

id is mandatory and should be unique for each section. 
<Section id="basic">
...
</Section>

Label

The label for the section. I18n is supported through string resources file.

 
<Label>Type</Label>

Tooltip

Tooltip for the field. Displayed when hovering the label.

 
<Tooltip>
    <Header>Basic</Header>
    <Content>Section to display basic fields.</Content>
</Tooltip>

Expanded

Whether section should be expanded on load of searchform. Default value is true.

 
<Expanded>true</Expanded>

Sections can be used to divide fields into collapsible group or sections. Each field configuration should specify its section using attribute sectionId on <Field> tag, which should match with id on corresponding <Section>. See example configuration below -

<SearchForm>
    <Title>Part Search</Title>
    <Sections>
    	<Section id="basic">
    		<Label>com.technia.tvc.search.form.name.label</Label>
    		<Tooltip>
    			<Title>Basic Fields</Title>
    			<Content>This is a section for basic fields.</Content>
    		</Tooltip>
    		<Expanded>true</Expanded>
    	</Section>
    	<Section id="classification">
    		<Label>Classification</Label>
    		<Tooltip>
    			<Title>Classification Fields</Title>
    			<Content>This is a section for classification fields.</Content>
    		</Tooltip>
    		<Expanded>false</Expanded>
    	</Section>
    	<Section id="others">
    		<Label>Other</Label>
    		<Tooltip>
    			<Title>Other Fields</Title>
    			<Content>This is a section for other fields.</Content>
    		</Tooltip>
    		<Expanded>false</Expanded>
    	</Section>
    </Sections>
    <Fields>
        <NameField sectionId="basic">
        	<Settings>
                <Setting name="casesensitive" value="true" />
            </Settings>
        </NameField>
        <TypeField id="type" sectionId="basic">
            ...
        </TypeField>

        <StateField sectionId="basic">
            ...
        </StateField>

        <RevisionField sectionId="basic">
            ...
        </RevisionField>

        <ClassificationField sectionId="classification">
            ...
        </ClassificationField>

        <Field sectionId="others">
            ...
        </Field>

        <PersonField sectionId="others">
            ....
        </PersonField>

        <Field attribute="attribute_MaterialCategory" id="material_category" sectionId="classification">
        ...
        </Field>
    </Fields>
</SearchForm>
Example Configuration
<?xml version="1.0" encoding="UTF-8"?>
<SearchForm>
    <Title>Part Search</Title>

    <Fields>
        <NameField />

        <TypeField>
            <Values>
                <Value value="Part" default="true" />
            </Values>
            <SearchableTypes>
                <Type>type_Part</Type>
                <Type>type_DOCUMENTS</Type>
            </SearchableTypes>
            <Tooltip>
                <Title>customer.search.type.tooltip.title</Title>
                <Content>customer.search.type.tooltip.content</Content>
            </Tooltip>
        </TypeField>

        <Field>
            <Label>Material Category</Label>
            <DataField>MATERIAL_CATEGORY</DataField>
            <Values attribute="attribute_MaterialCategory" />
            <Settings>
                <Setting name="showFilter" value="true" />
                <Setting name="showRangeAmount" value="10" />
            </Settings>
        </Field>
    </Fields>
</SearchForm>

1.1.3. Search Providers

ENOVIA Search Provider

Built-in ENOVIA Search Provider can be used to perform search in ENOVIA. It can be used with enovia callsign name in Search Configuration.

<Search provider="enovia" />
Settings

ENOVIA Search Provider supports following settings, which are defined in Search Configuration. See Configuration Format for details on how to configure settings.

Setting Name Description Default Example

vault

Enovia vaults where search should be performed. Multiple comma separated vaults can be configured.

eService Production

 
<Settings>
    <Setting name="vault" value="vault_eServiceProduction, vault_ACMEVault" />
</Settings>

where

A custom where clause can be passed to search provider. For example it can be used to search only non-obsolete parts.

none

 
<Settings>
    <Setting name="where" value="current != 'Obsolete'" />
</Settings>

termWhere

termWhere is applicable for term search. It defines where clause, into which user search term is to be injected while performing Enovia search. For example, if user entered term search as test, Enovia where clause will look like name ~~ 'test' OR type ~~ 'test' OR description ~~ 'test'

name ~~ '%s' OR type ~~ '%s' OR description ~~ '%s'

 
<Settings>
    <Setting name="termWhere" value="name ~~ '*%s*' OR description ~~ '*%s*' OR current ~~ '*%s*'" />
</Settings>
EXALEAD Search Provider

Built-in EXALEAD Search Provider can be used to perform search in Exalead. It can be used with exalead callsign name in Search Configuration.

<Search provider="exalead" />
Settings

EXALEAD Search Provider supports following settings, which are defined in Search Configuration. See Configuration Format for details on how to configure settings.

Setting Name Description Default Example

xl:termFields

Fields against which term search should be evaluated.

Term search is by default queried as against all indexed fields

 
<Settings>
    <Setting name="xl:termFields" value="NAME,DESCRIPTION" />
</Settings>

xl:sortField

Field on which search should be sorted.

none

 
<Settings>
    <Setting name="xl:sortField" value="NAME" />
</Settings>

xl:sortOrder

Sort order of search result.

ascending

 
<Settings>
    <Setting name="xl:sortOrder" value="DESCENDING" />
</Settings>

xl:enableWildcardSearch

Whether to add wildcard to term search.

false

 
<Settings>
    <Setting name="xl:enableWildcardSearch" value="false"/>
</Settings>

xl:inlcudeFacets

Whether to include facets or field counts.

true

 
<Settings>
    <Setting name="xl:inlcudeFacets" value="true" />
</Settings>
RevisionField

In case of exalead search provider, RevisionField can be configured in search form like below

<RevisionField sectionId="basic">
    <AnyRevision />
    <FirstRevision />
    <LastRevision />
    <LatestInState policy="EC Part" state="Release" />
    <LastAndLatestInRelease />
    <Settings>
        <Setting name="xl:lastRevision" value="LASTREVISION"></Setting>
        <Setting name="xl:firstRevision" value="FIRSTREVISION"></Setting>
        <Setting name="xl:latestRevision" value="LATESTREVISION"></Setting>
        <Setting name="xl:lastAndLatestRevision" value="LASTANDLATESTREVISION"></Setting>
    </Settings>
</RevisionField>

Following Exalead settings can be defined on search form fields. See Field Configuration Format for details on how to configure settings.

Setting Name Description Default Example

xl:firstRevision

Exalead key for first revision.

NOTE

This setting is applicable for revision field.

FIRSTREVISION

 
<Settings>
    <Setting name="xl:firstRevision" value="FIRSTREVISION" />
</Settings>

xl:lastRevision

Exalead key for last revision.

NOTE

This setting is applicable for revision field.

LASTREVISION

 
<Settings>
    <Setting name="xl:lastRevision" value="LASTREVISION" />
</Settings>

xl:latestRevision

Exalead key for latest revision.

NOTE

This setting is applicable for revision field.

LATESTREVISION

 
<Settings>
    <Setting name="xl:latestRevision" value="LATESTREVISION" />
</Settings>

xl:lastAndLatestRevision

Exalead key for lastAndLatestRevision revision.

NOTE

This setting is applicable for revision field.

LASTANDLATESTREVISION

 
<Settings>
    <Setting name="xl:lastAndLatestRevision" value="LASTANDLATESTREVISION" />
</Settings>

xl:showZeroCount

Whether '0' should be shown when Exalead count for a field value is 0.

false

 
<Settings>
    <Setting name="xl:showZeroCount" value="true" />
</Settings>
Total Result Count

When the search is performed against index based search engine like Exalead, search results are returned in terms of total hits and hits displayed on the page. Total hit count can now be seen on the top search result in Structure Browser. This can be useful for the user to get an idea of how many records search criteria match.

Follow string resource key can be used to customize the message. The first argument is page count and the second argument is the total count.

tvc.search.result.resultCount = Showing {} of total result {}
Custom Search Provider

Custom Search Provider can be used to perform search. It should implement interface com.technia.tvc.search.api.SearchProvider and provide implementation to method search(SearchContext context). SearchContext object provides access to following apis to perform search.

API Description

getCriteria

Search criteria supplied by the client. Typically what the user enters in the search form including term search.

getSearchForm

Instance of searchform to be used to get access to data fields against which search is performed

getDataFields

DataField which should be included in search result. This is used for rendering search result on UI.

getSettings

Custom Settings defined in Search Config. This is useful for passing adhoc settings to SearchProvider, see ENOVIA Search Provider Settings for reference.

In later Enovia or 3DExperience versions, Exalead CloudView search is accessed via a separate component known as Federated Search. 3DSpace and 3DDashboard call Federated Search API from the client to search and retrieve search results. Search results are loaded as static HTML components and does not allow table-level actions like mass edit, promote, demote, etc.

TVC New Search Experience can directly call Federated Search client API for search and getting 6W tags. These 6W tags are then added to the search form for further filtering search result. As standard implementation, TVC Search allows integrating or loading search results to structure browser flat table.

Search Config Changes

To enable this feature externalSearchURL should point to federated search:

<Search provider="enovia">
    <Limit>120</Limit>
    <SearchOnCriteriaUpdate>true</SearchOnCriteriaUpdate>
    <SearchOnLoad>false</SearchOnLoad>
    <OpenOnLoad>true</OpenOnLoad>
    <SearchForm ref="tvc:searchformv2:poc:mw:ups/SearchV2Form.xml" />
    <DataFields>
        <DataField>type</DataField>
    </DataFields>
    <Settings>
		<Setting name="externalSearchURL" value="https://19xdev.technia.com/federated/search" />
		<Setting name="applyCriteriaWithoutField" value="true" />
    </Settings>
</Search>

Alternatively, search URL can also be specified in global TVC init param or property in tvc.properties.

tvc.structurebrowser.search.external.searchURL = https://19xdev-search.technia.com/federated/search?xrequestedwith=xmlhttprequest

Even when global property is set, search config must explicitly set externalSearchURL to true.

<Search provider="enovia">
    <Limit>120</Limit>
    <SearchOnCriteriaUpdate>true</SearchOnCriteriaUpdate>
    <SearchOnLoad>false</SearchOnLoad>
    <OpenOnLoad>true</OpenOnLoad>
    <SearchForm ref="tvc:searchformv2:poc:mw:ups/SearchV2Form.xml" />
    <DataFields>
        <DataField>type</DataField>
    </DataFields>
    <Settings>
		<Setting name="externalSearchURL" value="true" />
		<Setting name="applyCriteriaWithoutField" value="true" />
    </Settings>
</Search>
For cross domain setup, please add query string xrequestedwith=xmlhttprequest to search URL

Below additional features are supported for federated search:

Search on load

Search config setting SearchOnLoad can be used to perform the initial search as search form loads.

<Search>
    <Limit>50</Limit>
    <SearchOnCriteriaUpdate>true</SearchOnCriteriaUpdate>
    <SearchOnLoad>true</SearchOnLoad>
    <OpenOnLoad>true</OpenOnLoad>
    ....
</Search>
When search on load is used, the search form must have default criteria selected, or else the search will fail.

Get only facet counts on load

It might be desired that only facet counts are fetched when the search form is loaded. This can be helpful for the user to start a search as it will show all facet counts.

It can be enabled by setting SearchOnLoad to true and adding setting getFacetCountsOnLoad.

<Search>
    <Limit>50</Limit>
    <SearchOnCriteriaUpdate>true</SearchOnCriteriaUpdate>
    <SearchOnLoad>true</SearchOnLoad>
    <OpenOnLoad>true</OpenOnLoad>
    <Settings>
		<Setting name="getFacetCountsOnLoad" value="false" />
	</Settings>
    ....
</Search>

Add Security Context to search payload

In some Enovia versions, it is needed that security context is also passed with search payload. This can be enabled by using setting addSecurityContextToExternalSearch. Value of setting must point to how login payload is supposed to be added to search payload. %s is replaced with security context on search:

<Search>
    <Limit>50</Limit>
    <SearchOnCriteriaUpdate>true</SearchOnCriteriaUpdate>
    <SearchOnLoad>true</SearchOnLoad>
    <OpenOnLoad>true</OpenOnLoad>
    <Settings>
		<Setting name="addSecurityContextToExternalSearch" value='{"login":{"3dspace":{"SecurityContext":"%s"}}}' />
	</Settings>
    ....
</Search>
Search Form Changes

For enabling 6Wtags, below sections for 6W tags should be added to searchform:

  • what

  • when

  • where

  • how

  • who

  • why

  • 6wtags

The label of these sections can be changed as needed and it will also support internationalization. However, the section id should as specified in XML below. 
<SearchForm>
    <Title>Search</Title>
    <Toolbar>
		<Menu ref="tvc:menu:poc:mw:ups/toolbar/SixWTagsToolbar.xml" />
        <SaveSearch />
        <LoadSearch />
    </Toolbar>
		<Sections>
			<Section id="freetext">
				<Label>Free Text</Label>
			</Section>
			<Section id="what">
				<Label>What</Label>
			</Section>
			<Section id="when">
				<Label>When</Label>
			</Section>
			<Section id="where">
				<Label>Where</Label>
			</Section>
			<Section id="how">
				<Label>How</Label>
			</Section>
			<Section id="who">
				<Label>Who</Label>
			</Section>
			<Section id="why">
				<Label>Why</Label>
			</Section>
			<Section id="6wtags">
				<Label>6W Tags</Label>
			</Section>
		</Sections>
    <Fields>
    ....
</SearchForm>

Federated Search makes it mandatory to start a search using a minimum of two characters or alternatively Type chooser can be configured to start a search. This can be enabled as:

<?xml version="1.0" encoding="UTF-8"?>
<SearchForm>
    <Title>Search</Title>
    <Toolbar>
        <SaveSearch />
        <LoadSearch />
		<Menu ref="tvc:menu:poc:mw:ups/toolbar/SixWTagsToolbar.xml"/>
    </Toolbar>
		<Sections>
			<Section id="initialsearch">
				<Label>Initial Search</Label>
				<Tooltip>
					<Title>Initial Search</Title>
					<Content>This is a section for initial fields.</Content>
				</Tooltip>
			</Section>
			<Section id="what">
				<Label>What</Label>
			</Section>
			<Section id="when">
				<Label>When</Label>
			</Section>
			<Section id="where">
				<Label>Where</Label>
			</Section>
			<Section id="how">
				<Label>How</Label>
			</Section>
			<Section id="who">
				<Label>Who</Label>
			</Section>
			<Section id="why">
				<Label>Why</Label>
			</Section>
			<Section id="6wtags">
				<Label>6W Tags</Label>
			</Section>
		</Sections>
    <Fields>
        <Field id="term" sectionId="initialsearch">
            <Label>Free Text</Label>
            <DataField>term</DataField>
            <Tooltip>
                <Title>Free Text</Title>
                <Content>Free text federated search</Content>
            </Tooltip>
			<Settings>
				<Setting name="retainOnSearchForm" value='true'/>
			</Settings>
        </Field>

		<Field id="flattenedtaxonomies" sectionId="initialsearch">
			<Label>Select Type</Label>
			<DataField>types</DataField>
			<UIType>autocomplete</UIType>
			<Settings>
				<Setting name="retainOnSearchForm" value='true'/>
				<Setting name="queryParam" value='flattenedtaxonomies:"types/%q"'/>
				<Setting name="autocompletehandler">{
					"name": "type",
					"rootTypes": ["Part"]
				}
				</Setting>
				<Setting name="reactselect">{
					"valueKey": "value",
					"labelKey": "label",
					"isMulti": "true"
				}
				</Setting>
			</Settings>
		</Field>
    </Fields>
</SearchForm>

In the above example, two fields will be added other than the 6W Tags fields. These two fields will show on searchform initially and the user can start a search using these two fields.

Following field-level settings are supported by external federated search API

Setting Name Description Default Example

retainOnSearchForm

If it is needed that searchform field should be retained after 6W tags are fetched, it should be marked as retainOnSearchForm using below settings.

false

 
<Settings>
    <Setting name="retainOnSearchForm" value='true'/>
</Settings>

queryParam

How query should be formed when field is added to search criteria for federated search. This is useful when we want to define fields to start search like Type field.

none

 
<Settings>
    	<Setting name="queryParam" value='flattenedtaxonomies:"types/%q"'/>
</Settings>

queryParamFromValue

queryParam will not work when the search is to be performed between from and to range, like a modified date. queryParamFromValue in combination with queryParamToValue can be used specify from and to range. On search, both these params are substituted and added to query with AND condition.

When both queryParam and queryParamFromValue or queryParamToValue is specified, from and to will take precedence over queryParam.

none

 
<Settings>
	<Setting name="retainOnSearchForm" value='true'/>
	<Setting name="queryParamFromValue" value='[ds6w:modified]&gt;="%q"'/>
	<Setting name="queryParamToValue" value='[ds6w:modified]&lt;="%q"'/>
</Settings>

queryParamToValue

queryParam will not work when the search is to be performed between from and to range, like a modified date. queryParamFromValue in combination with queryParamToValue can be used specify from and to range. On search, both these params are substituted and added to query with AND condition.

When both queryParam and queryParamFromValue or queryParamToValue is specified, from and to will take precedence over queryParam.

none

 
<Settings>
	<Setting name="retainOnSearchForm" value='true'/>
	<Setting name="queryParamFromValue" value='[ds6w:modified]&gt;="%q"'/>
	<Setting name="queryParamToValue" value='[ds6w:modified]&lt;="%q"'/>
</Settings>
Page Config Changes

To support the navigation of search results via structure browser pages, it is required to use the below built-in table bean and table renderer. Search results are loaded in the structure browser table, defined using page config. Following parameters should be added to page config for table bean and table renderer.

<PageConfig>
    ...
	<Parameters>
		<Parameter name="bean" value="com.technia.tvc.structurebrowser.search.table.DefaultSearchTableBean" />
		<Parameter name="tableRenderer" value="com.technia.tvc.structurebrowser.searchv2.render.SearchResultTableRenderer" />
	</Parameters>
	...
</PageConfig>
Sorting 6W Tags Toolbar

It is possible to define a toolbar add it to searchform to control sorting and other actions on 6W tags once they are rendered inside searchform. An example of how this can be done is as below:

<Menu>
	<Label>6W</Label>
	<FontIcon>icon sort</FontIcon>
    <Command>
		<Id>sixwsort</Id>
		<Label>Weight</Label>
		<Setting name="onClick" value="tvc.searchV2.external.arrangeFieldsBy6WTags"/>
		<FontIcon>icon sort</FontIcon>
	</Command>
    <Command>
		<Id>alphasort</Id>
		<Label>Alpha</Label>
		<Setting name="onClick" value="tvc.searchV2.external.sortFieldsInAlphabeticalOrder"/>
		<FontIcon>icon sort alphabet  ascending</FontIcon>
	</Command>
	<Command>
		<Id>alphasortreverse</Id>
		<Label>Reverse Alpha</Label>
		<Setting name="onClick" value="tvc.searchV2.external.sortFieldsInAlphabeticalOrderReverse"/>
		<FontIcon>icon sort alphabet  descending</FontIcon>
	</Command>
		<Command>
		<Id>occurrencesort</Id>
		<Label>Occurrence</Label>
		<Setting name="onClick" value="tvc.searchV2.external.sortFieldsInOccurrenceOrderReverse"/>
		<FontIcon>icon sort numeric ascending</FontIcon>
	</Command>
	<Command>
		<Id>occurrencereversesort</Id>
		<Label>Reverse Occurrence</Label>
		<Setting name="onClick" value="tvc.searchV2.external.sortFieldsInOccurrenceOrder"/>
		<FontIcon>icon sort numeric descending</FontIcon>
	</Command>

</Menu>

This menu can then be added to searchform toolbar as shown below:

<SearchForm>
    <Title>Search</Title>
    <Toolbar>
        <SaveSearch />
        <LoadSearch />
		<Menu ref="tvc:menu:poc:mw:ups/toolbar/SixWTagsToolbar.xml"/>
    </Toolbar>
    ...
</SearchForm>

Following built in javascript APIs can be used for sorting and arranging 6W tags:

JavaScript API Description

tvc.searchV2.external.arrangeFieldsBy6WTags

Used for arranging 6W tags based on 6W labels or sections. This is default sorting.

tvc.searchV2.external.sortFieldsInAlphabeticalOrder

Sort 6W Tags in alphabetical order.

NOTE

All 6W tags will be group together in one section. Individual 6W tag sections will be removed.

tvc.searchV2.external.sortFieldsInAlphabeticalOrderReverse

Sort 6W Tags in reverse alphabetical order.

NOTE

All 6W tags will be group together in one section. Individual 6W tag sections will be removed.

tvc.searchV2.external.sortFieldsInOccurrenceOrderReverse

Sort 6W Tags in occurrence order. The number of values is counted as occurrence.

NOTE

All 6W tags will be group together in one section. Individual 6W tag sections will be removed.

tvc.searchV2.external.sortFieldsInAlphabeticalOrder

Sort 6W Tags in reverse occurrence order. The number of values is counted as occurrence.

NOTE

All 6W tags will be group together in one section. Individual 6W tag sections will be removed.

1.2. Search With Action

searchWithActions can be used to search and perform custom logics on searched objects, using custom javascript function. searchWithActions keeps searchform open on left side and search results are displayed in right side allowing easy refinement of search results. The search result can be fetched from Exalead also. This feature can be initiated in the following ways:

  • Context menu of the table

  • Command in toolbar

image
Figure 5. Search Based Connect in Toolbar

1.2.1. Configuration

The new search with action is launched from command. The URL for new search with action is shown below:

${ROOT_DIR}/tvc-action/searchWithActions

This URL supports following parameters:

Parameters
Parameter Description Required Example

searchConfig

Name of the search configuration. It is used to configure behaviour of the search.For more details visit here

Yes

<Param name="searchConfig" value ="tvc:searchv2:tvx:common/SearchV2Config.xml"/>

pageConfig

Name of the page configuration. A page configuration is used to configure behaviour of the Structure Browser. For more details visit here

Yes

<Param name="pageConfig" value="tvc:pageconfig:tvx:misc/MyParts.xml" />

onSubmitJSFunction

Can be used to declare custom JavaScript code that is used to perform action on submit button

Yes

<Param name="onSubmitJSFunction" value="javascript:var o=parent.frames['tableContentFrame'].tvcGetSelectedSelections(); top.close();"/>

onCancelJSFunction

Can be used to declare custom JavaScript code that is used to perform action on cancel button

Yes

<Param name="onCancelJSFunction" value="javascript:top.close();"/>

submitLabel

Defines label for submit button, by default it will show Submit.

tvc.structurebrowser.button.submit

cancelLabel

Defines label for cancel button, by default it will show Cancel

tvc.structurebrowser.button.cancel
Example Configuration
<Command>
    <Label>SearchWithActions</Label>
    <URL action="searchWithActions" submit="true" target="popup" submitOID="true">
        <Param name="searchConfig" value ="tvc:searchv2:tvx:common/SearchV2Config.xml"/>
        <Param name="pageConfig" value="tvc:pageconfig:tvx:misc/MyParts.xml"/>
        <Param name="onSubmitJSFunction" value="javascript:var o=parent.frames['tableContentFrame'].tvcGetSelectedSelections(); top.close();"/>
        <Param name="onCancelJSFunction" value="javascript:top.close();"/>
        <Param name="submitLabel" value="tvc.structurebrowser.button.submit"/>
        <Param name="cancelLabel" value="tvc.structurebrowser.button.cancel"/>
    </URL>
</Command>

1.3. Search And Connect

Action searchAndConnect can be used to search and connect objects from search results to one or more objects in table. searchAndConnect keeps searchform open in the left side and displays results in the right side, allowing easy refinement of search results. In this Exalead based search is also possible. This feature can be initiated in the following ways:

  • Context menu of the table

  • Command in toolbar

image
Figure 6. Search And Connect

1.3.1. Configuration

The new search and connect is launched from command. The URL for new search and connect command is shown below:

${ROOT_DIR}/tvc-action/searchAndConnect

This URL supports following parameters:

Parameters
Parameter Description Required Example

searchConfig

Name of the search configuration. It is used to configure behaviour of the search. For more details visit here

Yes

<Param name="searchConfig" value ="tvc:searchv2:tvx:common/SearchV2Config.xml"/>

pageConfig

Name of the page configuration. A page configuration is used to configure behaviour of the Structure Browser. For more details visit here

Yes

<Param name="pageConfig" value="tvc:pageconfig:tvx:misc/MyParts.xml" />

relationship

The relationship to connect with object

yes

<Param name="relationship" value="EBOM" />

direction

The default direction when connecting objects (i.e., from or to)

Yes

<Param name="direction" value="from" />
The target location of the command must be popup.
Example Configuration
<Command>
    <Label>SearchAndConnect</Label>
    <URL action="searchAndConnect" submit="true" target="popup" submitOID="true">
        <Param name="searchConfig" value ="tvc:searchv2:tvx:common/SearchV2Config.xml"/>
        <Param name="pageConfig" value="tvc:pageconfig:tvx:misc/MyParts.xml" />
        <Param name="relationship" value="EBOM" />
        <Param name="direction" value="from" />
    </URL>
</Command>