30 March 2016

1. Built’in Features

This chapter describes the built’in features of the Structure Browser. Some of them may be configurable and some may not be enabled by default.

1.1. Data Grouping

The data grouping function can be used to group data, based upon column values, into different groups.

This function is available from any table page (flat list or structure), and operates on the data within a table/structure.

The data grouping function is launched via this button:

image

As an example, assume that you have a structure like in the screenshot below.

image

Launching the data grouping function and define two groups: type + current state, would give a result like the screenshot below.

image

The different groups have different colours, and above the table there is a legend where the colour is mapped to the group. The first column after the structure shows the value (label) and the number of rows that mapped the group.

A group can be expanded in order to see the content of a particular group.

image
A column can be configured to not being groupable by applying the setting "Groupable" to false. The default value for this setting is same as the "Allowed in Charts".

1.1.1. Remember data grouping

Column based data grouping is by default remembered over time and can be turned off by setting the init parameter tvc.structurebrowser.persistentDataGrouping to "false".

Complex data grouping using operators is not remembered over time.

1.1.2. Initially Grouping of the Data

The data can be grouped when it’s being loaded initially. This is done by using the post-processing feature.

Grouping instructions are defined within the parameters section of the page configuration object being used. Example below.

postProcess=group
groupBy=%state#ED{year-quarter}#UOM

The first row specifies that the group-post-processor should be used.

The second row defines the grouping criteria. The syntax of the "groupBy" property is

groupBy            := group [ "#"<group> ] [ "#"<group> ]
group              := <built-in-field> | <column-ref>[ "{" <group-spec> "}"]
built-in-field     := "%"<built-in-field-ref>
built-in-field-ref := "type" | "name" | "revision" | "state" | "policy" | "reltype"
column-ref         := name of the column within the table
group-spec         := depends upon data-type for column

Up-to three different groups can be specified, each group is separated with a "#" character.

When the data is grouped initially, the grouping can be done on some properties that don’t need to be specified as columns within the table (built-in-field). These properties are, and are referred to as:

  • object type %type

  • object name %name

  • object revision %revision

  • object state %state OR %current

  • object policy %policy

  • relationship type %reltype OR %relationshiptype OR %rel

If you group date attributes, you can supply additional instructions how the group should be created. For example:

  1. ED{year-month} → Group effectivity date column by year and month

  2. ED{year-quarter} → Group effectivity date column by year and quarter

  3. ED{year-week} → Group effectivity date column by year and week

  4. ED{week-day} → Group effectivity date column by week and day

The examples shown above are just a subset of the possible combinations.

For numeric fields, the instructions can be created like the following example:

  1. FN{0⇐⇐10,⇐10} → two groups

  2. FN(==0,0<<10,==10,⇐11} → four groups

  3. FN{<0,==0,⇐0} → three groups

By default, the grouped data structure will replace the original table. I.e. the user can not use the go-back to see the data as it was loaded. However, by adding a property to the "TVC Custom Parameters" attribute this can be enabled:

group.keepOld=true

1.1.3. Data Group Sorting

Precedence of sort order

  • Custom group node comparator

  • Sort by Size or Name

  • CellComparator if cell value

  • Alphabetically fallback if no cell value

Custom group node comparator

This comparator is defined in pageconfig. This comparator must extends GroupNodeComparator.

<PageConfig>
    <Views>
        <View default="true" name="tvc:view:tvx:enc/AsStored.xml" />
    </Views>
    <Parameters>
        <Parameter name="dataGroupComparator" value="com.technia.tvx.common.comparator.UomComparator"/>
    </Parameters>
    <ToolBar>tvc:menu:tvx:misc/MyParts.xml</ToolBar>
</PageConfig>

Comparator example:

public class UomComparator extends GroupNodeComparator {

    public UomComparator(Comparator<? super StructureBeanNode> comparator) {
        super(comparator);
    }

    @Override
    public int compare(StructureBeanNode o1, StructureBeanNode o2) {
        int level = o1.getLevel();
        GroupNode g1;
        GroupNode g2;
        int i = 0;
        if (o1 instanceof GroupNode && o2 instanceof GroupNode) {
            g1 = (GroupNode) o1;
            g2 = (GroupNode) o2;
            if (level == 0) {
                i = g1.getGroupID().getLabel().length() > g2.getGroupID().getLabel().length() ? 1 : -1;
            } else {
                i = g1.getGroupSize() > g2.getGroupSize() ? -1 : 1;
            }
        }
        return i;
    }
}
Sort by Size or Name

The example

<PageConfig>
    <Views>
        <View default="true" name="tvc:view:tvx:enc/AsStored.xml" />
    </Views>
    <Parameters>
        <Parameter name="group.sortByName" value="false" />
    </Parameters>
    <ToolBar>tvc:menu:tvx:misc/MyParts.xml</ToolBar>
</PageConfig>

If group.sortByName parameter is not defined, the sorting will be by size.

To use the cell comparator, you need to set the value of group.sortByName to true.

1.2. Generate Charts

The definition of a chart allows you to choose which content in the table displayed by the Structure Browser that will become input to the generated chart. You can also define rules to replace or group values in the table for more informative and intuitive charts. Grouping is described at the end of this section.

image
Figure 1. click on the Chart button to start

The following sections shows examples on how to create nine different types of charts, namely:

  • Pie charts

  • Multiple pie charts

  • Ring charts

  • Bar charts

  • Stacked bar charts

  • Area charts

  • Stacked area charts

  • Timeline charts

  • Bubble charts

The first eight types of charts work similarly. They visualize the number of occurrences of values in the first column for the selected objects in the underlying Structure Browser table. When available, if a second column is chosen the data is grouped in categories from that column. The Bubble chart works differently, see chapter below.

1.2.1. Pie Chart

image
Figure 2. defining a Pie Chart
image
Figure 3. generated Pie Chart

The resulting Pie chart shows the distribution of values from the chosen attribute, for the selected objects.

1.2.2. Ring Chart

image
Figure 4. defining a Ring Chart
image
Figure 5. generated Ring Chart

The resulting Ring chart shows the distribution of values from the chosen attribute, for the selected objects.

1.2.3. Multiple Pie Chart

image
Figure 6. defining a Multiple Pie Chart

When defining a Multiple Pie Chart the data is collected from two columns in the underlying Structure Browser table.

image
Figure 7. generated Multiple Pie Chart

The resulting chart shows the distribution of values from the two chosen columns, for the selected objects. The first column generates one pie chart per unique value. The second is shown in each pie chart in the same way as in the Pie Chart case.

1.2.4. Bar Chart

image
Figure 8. defining a Bar Chart

When defining a Bar Chart the data is collected from one or two columns in the underlying Structure Browser table.

image
Figure 9. generated Bar Chart

The resulting chart shows the distribution of values from the two chosen columns, for the selected objects. The first column generates one individual "bar chart group" per unique value. The values of the second column are represented as one bar per value.

1.2.5. Stacked Bar Chart

image
Figure 10. defining a Stacked Bar Chart

When defining a Stacked Bar Chart the data is collected from two columns in the underlying Structure Browser table.

image
Figure 11. generated Stacked Bar Chart

The resulting chart shows the distribution of values from the two chosen columns, for the selected objects. The first column generates one bar per unique value. Each bar is divided into one section per unique value of the second column.

1.2.6. Area Chart

image
Figure 12. Defining an Area Chart

When defining an Area Chart the data is collected from one or two columns in the underlying Structure Browser table.

image
Figure 13. Generated Area Chart

The resulting chart shows the distribution of values from the two chosen columns, for the selected objects. The first column generates one position per unique value on the horizontal (x) axis. The values from second column are used to create an area where the values are used as end points that sets the bounds of the area, on the vertical (y) axis.

1.2.7. Stacked Area Chart

image
Figure 14. Defining a Stacked Area Chart

When defining a Stacked Area Chart the data is collected from two columns in the underlying Structure Browser table.

image
Figure 15. Generated Stacked Area Chart

The resulting chart shows the distribution of values from the two chosen columns, for the selected objects. The first column generates one position per unique value on the horizontal (x) axis. The values from second column are used to create an area where the values are used as end points that sets the bounds of the area, on the vertical (y) axis. The difference compared to the Area Chart is that the values on the vertical axis are accumulated.

1.2.8. Timeline Chart

image
Figure 16. Defining a Timeline Chart

With the Timeline chart you need to specify one or two columns as input. Column one only accepts date columns as input and is plotted on the horizontal (x) axis. The second column defines the different series of data and for each unique value a timeline is created. The different series are displayed in different colors. This example counts the number of issues per project that the issues are reported against.

image
Figure 17. Generated Timeline Chart

The generated Timeline chart example displays the number of Issues created per day. In the example the number of issues for project "Power Supply" is plotted per start date. The example shows that one issue was created on the 1st of July, two on the 8th and so forth.

1.2.9. Bubble chart

image
Figure 18. Defining a Bubble Chart

With the Bubble chart you need to specify four or five columns as input. Column one is used to determine where a bubble is placed on the horizontal (x) axis. Data from the second column defines where on the vertical (y) axis the bubble is placed. The third sets the size of the bubble and the fourth is used to group the bubbles. The fifth and optional input column is used to put a label on each bubble. The first three columns require numerical data; therefore only columns with numerical data are shown.

image
Figure 19. Generated Bubble Chart

The generated Bubble chart displays one bubble per row in the underlying Structure Browser table.

1.2.10. Grouping

When defining a chart you have the possibility to group values, with the exception of Bubble charts where the grouping option is not available. You use the grouping option when you want to group values from the same column together and use a descriptive text for the group instead of the actual attribute value of the column.

The following example shows first a chart without grouping selected and then with grouping.

image
Figure 20. Defining a chart without grouping
image
Figure 21. Generated chart without grouping
image
Figure 22. Defining the same chart with grouping
image
Figure 23. Generated chart with grouping

1.3. Clipboard

A new built-in feature called Clipboard was added in version 6.0 of the Structure Browser. The clipboard can be used to hold objects, selected by the user. The clipboard is opened inside the side panel and the content of the clipboard is remained between sessions. The clipboard can also be used in the search tool, if configured so. The screenshot below illustrates the clipboard functionality.

image
Figure 24. Clipboard

On each entry in the clipboard, the user can choose to either remove the entry or navigate the entry – i.e. performing a go-there operation on the object representing the entry.

To enable or disable the clipboard on a structure browser page, one has to set the <Visible clipboard="true" /> in the page configuration object that is controlling the structure browser instance.

To completely disable the clipboard functionality for all structure browser pages, one can set the system property of TVC called tvc.structurebrowser.clipboard.enabled to FALSE.

To enable the clipboard from the search function, there is a configurable option within the search configuration or build structure configuration object that controls that.

It is possible to configure the clipboard to allow the user to navigate an object within the clipboard; e.g. making the selected object from the clipboard the root object in the current structure. This was is by default disabled since it is might allow the user to navigate an object within the wrong context (e.g. using wrong filters → user could see connections that aren’t supposed to be shown).

This feature can be enabled (it will be disabled default) through setting an init parameter:

<init-param>
    <param-name>tvc.structurebrowser.clipboard.goThere</param-name>
    <param-value>true | false</param-value>
</init-param>

1.3.2. Clipboard Store

The content of the clipboard is by default stored into a set in the database. Previous versions had other alternatives for this; however these have been removed as of the 2009.1 release.

This set is saved with the name mxClipboardCollections, if the ENOVIA version is V6R2009 of later. For earlier versions, this name is .clipboard.

It is however, possible to change this name through the following init-parameter (the name must not be longer than 127 characters, and might only contain characters that are valid for ENOVIA sets):

<init-param>
    <param-name>tvc.structurebrowser.clipboard.name</param-name>
    <param-value>My Clipboard</param-value>
</init-param>

1.4. Using Collections

TVC contains functionality allowing the user to work with collections. A collection is used to store arbitrary business objects.

The structure browser can be configured to allow the user to do so or not do so, by setting the page config settings "Add To Collection" and/or "Manage Collections" to true or false. Example:

<PageConfig>
    <Visible clipboard="true" />
    ...
    <AddToCollection>TRUE</AddToCollection>
    <ManageCollections>TRUE</ManageCollections>
    ...
</PageConfig>

The buttons for either adding objects to a collection, or manage collections, are available via the context button in the toolbar as shown in the screenshot below.

image
Figure 25. Add to collection and manage collections buttons

1.4.1. Adding Object(s) to a Collection

The "add to collection" function allows the user to add all the objects within the table or the selected objects (if selections has been made), or all objects except the selected objects (if selections has been made) to a new collection or to an existing collection if there are any existing collections.

It is possible to add "add to collection" function in the context menu by adding command AddToCollectionFromMenu.

Below is an example on how to configure this:

<Menu>
    <Command ref="tvc:command:sb:collection/AddToCollectionFromMenu.xml"/>
</Menu>
AddToCollectionFromMenu command in context menu required the page config parameter rememberSelectedRow or init-parameter tvc.structurebrowser.rememberSelectedRow (default false) should be true.

If adding to an existing collection, the user may also select if to either append the new objects, or to replace the old objects within the selected collection.

The screenshot below illustrates how this dialog may appear for the user.

image
Figure 26. Adding objects to a collection

1.4.2. Manage Collection(s)

The manage collection(s) function, allows the user to perform different operations on his/her collections.

The operations that can be made are:

  • Create a new empty collection

  • Delete an existing collection

  • Edit a collection

  • Distribute a collection to another user within the same company as the user

  • Change name or edit the description of a collection

  • Merge one or more collections into another collection

The screenshot below illustrates these operations.

image

When clicking on the collection name, the content of the collection is opened inside a flat table.

The user can from there easily add/remove items from the collection, or click an object inside the collection in order to start working with that object.

This function can also be used, for example as the home page for a user. Simply assign the command "TVC Show Collections" to the menu called "My Desk".

While distributing collections, user can notify other users with whom he/she is distributing a collection by using the following configuration. The default setting is true.

This can be disabled at the global level by using the following setting:

in tvc.properties setting:

tvc.structurebrowser.collections.distribute.notify = false

Or as init-parameter:

<init-param>
    <param-name>tvc.structurebrowser.collections.distribute.notify</param-name>
    <param-value>false</param-value>
</init-param>

Title and content of mail can be controlled through string resource property file, below is the key of title and content:

tvc.structurebrowser.collections.notify.content = User {0} has shared a collection {1} with you.

tvc.structurebrowser.collections.notify.title = Shared Collection {0}

1.5. Email Notification

The structure browser has a built-in feature that allows the user to select one or more objects and add these to an email that can be sent to one or more users. The email notification feature requires you to configure the system so that the MX_SMTP_HOST variable is set.

The email notification dialog can be opened in a popup window or in the side panel, with or without the possibility to use the editor that allows the user to format the emails using HTML markup.

The screenshot below illustrates how a command that launches the email notification dialog can be a attached to the context menu.

image

The send notification dialog in the side panel with the HTML editor is shown below.

image

The notification dialog has the following features:

  • Auto completion when selecting the user(s) to send the notification too.

  • The message can be configured through the URL request parameters, such as subject and message and allows having macros.

  • Using HTML formatted messages or plain text messages.

  • Show in side panel or in a popup window.

  • Sending multiple objects in the same mail.

The URL used to open the email notification dialog is shown below

${ROOT_DIR}/tvc-action/sendNotification

This URL accepts a number of request parameters that can be used to control the behaviour of the dialog:

Parameter Description Example

popup

A Boolean value that defines if the dialog is opened in the side panel or within a popup dialog. (see below for additional info regarding this parameter).

True / False

html

Defines if to use HTML formatted messages.

True / False

subject

Defines a pre-defined subject for the message.

Please check the following ${COUNT} item(s)

msgHeader

A text that appears at the top of the message

Providing multiple arguments results in that each value is put on a separate row.

msgFooter

A text that appears at the bottom of the message

Providing multiple arguments results in that each value is put on a separate row.

macro

The macro to be used when formatting the label for each object.

This is only applicable if you use HTML format.

${NAME}:${REVISION} (${STATE})

The command must be configured correctly, e.g. if the popup parameter is set to true, the target location of the command must be popup. If set to false, the target location must be "card" and some other settings such as "Card Width" must be set.

An example command, defined in XML, is shown below.

<Command>
    <Label>Send Notification (Side Panel, HTML)</Label>
    <URL action="/sendNotification">
        <Param name="subject" value="Please check the following ${COUNT} item(s)"/>
        <Param name="msgHeader" value="Hi,"/>
        <Param name="msgHeader" value="Please review the following items, thanks"/>
        <Param name="msgFooter" value="Regards,"/>
        <Param name="msgFooter" value="${FROM_USER}"/>
        <Param name="macro" value="${NAME}:${REVISION} (${STATE})"/>
    </URL>
    <SubmitForm>true</SubmitForm>
    <RowSelectType>multiple</RowSelectType>
    <TargetLocation>card</TargetLocation>
    <CardID>notification</CardID>
    <CardWidth>636</CardWidth>
</Command>

1.6. Mass Promote / Demote

Promoting or demoting the selected objects can be done by enabling the promote/demote buttons through the page configuration object. Once enabled, two new buttons are added to the toolbar among the context buttons as shown below.

image

There is an init-param, named tvc.structurebrowser.lifecycle.changestate.enableSmartSorting default true, which will control the way of mass promoting. If it is true, selected objects in a structure for promote start promoting selected leaf nodes first, then their selected parents and so on all way up to the root(s).

1.7. Mass Update

When the setting "Allow Multiple Edit" has been set to true on a system table column, the column is editable, and the user has access to edit at least one cell in the column, an icon will appear on the column header that the user can click in order to edit multiple cells in a single column to the same value.

Note however that only cells that the user has access to edit will be edited. Moreover, if the select expression on the column doesn’t apply to the business object or relationship on a specific row, the cell on that row will not be edited either. For example, if the select expression selects a certain attribute that some business objects displayed in the Structure Browser don’t have, these cells will not be edited. In short, only cells that would otherwise be editable when the Structure Browser is displayed in edit mode will be editable through the multiple cell editing function.

image
Figure 27. Mass updating

If one or more rows have been selected, and the user is allowed to edit the cell in at least one of these rows, the user can choose whether to edit the selected rows or all rows. If no valid selections has been made all rows will be edited automatically. Note that a confirm dialog will appear whenever the user choose to edit all rows to avoid unintended modifications.

image
Figure 28. Mass update dialog

The mass update dialog is shown within the side-panel. If there is more than one column allowed for mass updating, the user can easily change the working column from the drop down list showing the column.

User can check "Keep Selection" to retain selection for further mass updating other columns.

By default "Keep Selection" is unchecked.

The administration can override the default behaviour using following tvc property setting for application level.

tvc.structurebrowser.massupdate.keepSelection=true

On per structure browser instance level also behaviour can be overridden. (Configuration is done within the page-configuration).

To do so, add parameters to the page configuration object:

<PageConfig>
    ...
    <Parameters>
        <Parameter name="massupdate:keepSelection" value="true"/>
    </Parameters>
    ...
</PageConfig>

1.7.1. Partial Mass Update

While doing mass update if validation fails for some objects and pass for other objects, it is possible to update objects for which validation is passed successfully.

This can enabled at global level using following setting

in tvc.properties setting

tvc.core.massupdate.partial=true

Or as init-parameter:

<init-param>
    <param-name>tvc.core.massupdate.partial</param-name>
    <param-value>true</param-value>
</init-param>

By default it is disabled.

It can be enabled as column level by adding following setting :-

<Column>
    ...
        <Setting name="Partial Update">true</Setting>
    ...
</Column>

and return false from update function for unmatched condition.

Setting defined as column level takes precedence over global setting

1.8. Searching inside a Table/Structure

The search button in the toolbar allows users to find or filter data inside a table or structure based on their input. To enable this function at least one of the page configuration attributes "TVC Visible Structure Search" and "TVC Visible Advanded Filter" has to be true. By pressing the arrow on the left side of the search button you can quickly search for rows in a table or structure that contains a certain text.

image
Figure 29. Quick search

The list of searchable columns shown in search dropdown can be sorted alphabetically. It can be enabled for a specific page through the pageconfig using parameter as below

<PageConfig>
    ...
    <Parameters>
    <Parameter name="sortSearchableColumns" value="true"/>
    </Parameters>
    ...
</PageConfig>

Or globally by applying the following init parameter.

<init-param>
    <param-name>tvc.structurebrowser.table.search.sortSearchableColumns</param-name>
    <param-value>true</param-value>
</init-param>

Default value for this setting is false.

In the result of Quick Search, Structure Browser will display an area above the table showing what parameters you’ve searched on. Also, the column headers and search hits will be highlighted with different background colors.

image
Figure 30. Search result

If you click on the "Edit" link in the search area above the table, or if you click on the search button on the toolbar, you can create complex queries in the search side panel. You are can also to save and load your queries.

If the table you’re searching in is a structure, the search side panel will contain a few more options. You can select if you want to search in the full structure, if the result should be displayed in a flat list, and if the query must match on every level in the structure (i.e., as a filter).

image
Figure 31. Searching inside a structure

By default "Any Field" is added in search-In forms. It can be controlled for a specific page through the pageconfig using parameter as below

<PageConfig>
    ...
    <Parameters>
    <Parameter name="searchIn:anyField" value="false"/>
    </Parameters>
    ...
</PageConfig>

Or globally by applying the following init parameter.

<init-param>
    <param-name>tvc.structurebrowser.searchIn.anyField</param-name>
    <param-value>false</param-value>
</init-param>

By default searches are remembered the next time the user visits the page. This can be inactivated either for a specific page through the pageconfig using parameter searchInStructurePersistent or globally by applying the following init parameter:

<init-param>
    <param-name>tvc.structurebrowser.find.persistent</param-name>
    <param-value>false</param-value>
</init-param>

This setting also applies for the finder.

1.8.1. Finder

The finder is used to find objects in a table. A search form is displayed above the table where the user can enter search criteria.

image
Figure 32. finder search form

The finder is activated in the pageconfig. When activated a magnifier icon is displayed in the toolbar. Clicking the button opens/closes the search form. It is possible to configure that the search form should be displayed when the page is loaded.

Sometimes the user wants to search for a value across all columns. This can be achieved with the "Any field" functionality. The user enters a criteria and the every column is evaluated if it has a matching value. All data in the table needs to be loaded so use this feature with care.

Example of a pageconfig:

<PageConfig>
    ...
    <Parameters>
        <Parameter name="finder" value="true"/>
        <Parameter name="finder:openOnLoad" value="true"/>
        <Parameter name="finder:anyField" value="true"/>
    </Parameters>
    ...
</PageConfig>

In the column configuration you define if the column should be searchable. It is also possible to specify the name, tooltip, order and type of the search field. The name and tooltip is displayed in the left hand side of the search form. In what order the columns are displayed in the search form is determined by the order setting. It is a numeric value where the column with lowest number is displayed at the top.

Each column has a search type. It effects how the user enters the search criteria. Currently four types are supported:

  • Freetext. In an input field the user can enter a text. Any value containing this text is considered to be a match.

  • Boolean. Yes and no buttons are displayed.

  • Range. For each range value a button is displayed. The user can select one or more of the values. The available values are fetched from the column. This means you can implement your own Range Handler to control what buttons that should be available.

  • Date. User can enter from and/or to dates.

In case the type setting is omitted the most suitable type for the column is used.

Example configuration of table column:

<Column>
    <Name>Name</Name>
    <Expression>name</Expression>
    <Label>Object Name</Label>
    <Setting name="Finder" value="true"/>
    <Setting name="Finder Label" value="My label"/>
    <Setting name="Finder Type" value="freetext"/>
    <Setting name="Finder Order" value="1"/>
</Column>

In the background the Search in Structure functionality (described in previous chapter) is used by the finder. There are some differences in the implementations which prevents them from being used at the same time. If the finder is enabled the search in structure is disabled.

To activate the finder across the

The finder feature is disabled by default and can either by activated per pageconfig or globally. It is enabled globally by applying the following init parameter:

<init-param>
    <param-name>tvc.structurebrowser.finder</param-name>
    <param-value>true</param-value>
</init-param>

1.9. Storing User Selections

The selections made regarding view, table, filters and last sorted columns are by default stored between the usages of a structure instance. The selections are coupled together with the actual page configuration instance that was used to initialize the structure instance.

If no such object is used, but the structure browser instance is configured via URL parameters – then the user selections can/will not be stored.

The selections are stored persistently between sessions, i.e. the user will get his/her last selections even after logging in again to the application.

There are some system parameters related to this, which can be used to configure the behaviour.

Parameter Description

tvc.structurebrowser.rememberSelections

A Boolean flag that indicates if to remember the selections or not. Default is TRUE.

tvc.structurebrowser.persistentSelectionStorage

This Boolean flag indicates whether or not the storage should be made persistently or not. Default is TRUE.

tvc.structurebrowser.persistentSelectionStorageType

Defines the strategy how to store the selections, the value could either be "file" , "db" or "dataobject". Dataobject storage is only available as of version 10.7 of ENOVIA.

By default, the system will try to use dataobject as default storage mechanism, if that isn’t available, "db" will be the second approach. If none of these are valid, "file" will be used.

When set to "file", the selections are stored in a temporary folder, which the application server has provided for the application.

To control selection tracking for a specific page configuration use the parameter "selectionTracking" (true/false).

The user preferences function can be used to clear the stored used selections.

The selections can be cleared by invoking the following URL:

${ROOT_DIR}/tvc-action/clearSelections?clearAll=TRUE|FALSE

If the "clearAll" flag is set to FALSE, then the command must be submitted from the structure browser in order to clear the selections for the current table only.

1.10. Table Calculations

It is possible to perform calculations on the cells within a column. The calculations that can be performed are "Sum", "Max", "Min", "Average", "Median" and "Standard Deviation". A column can have multiple calculations at the same time. The results of the calculations are shown below the data within the table, as illustrated in the picture below.

image
Figure 33. Table Calculation Example

If the table is paginated, the calculations are made both for the items on the current page as well as for all the items.

To enable table calculations, use the settings "Calculate Sum", "Calculate Average", "Calculate Median", "Calculate Standard Deviation", "Calculate Maximum" and "Calculate Minimum". The values for these settings are Booleans (true / false).

The decimal precision being used in the calculations are by default taken from the AEF system properties. It is possible to override this by adding the setting "Calculation Decimal Precision" to the column. The value of this setting is an integer value defining the number of fraction digits to display.

If you are using TVC in a non-AEF environment, you can use the following init-parameter to define the default decimal precision:

<init-param>
    <param-name>tvc.core.tableCalculations.decimalPrecision</param-name>
    <param-value>2</param-value>
</init-param>
the calculations are not shown in exports or on the PDF printer friendly page.

A calculation filter can be applied to the page to only calculate based on root or leaf nodes. Set parameter is "tableCalculationFilter" and the possible values are "roots" and "leafs".

<Parameters>
    <Parameter name="tableCalculationFilter" value="roots"/>
</Parameters>

1.10.1. Group Calculations

It is possible to display group calculations in the same way it is working for table calculations.

image

Group Calculation Example

It is working in tile view also.

Here is the configuration required:

<GroupCalculation>Sum,Average,StdDev,Minimum,Maximum,Median</GroupCalculation>

Note that the order defined here will be preserved while displaying.

1.11. Table Configuration (Column Configuration)

The table configuration tool can be used to personalize a certain table.

The tool allows the user to change the visibility of the columns, as well as changing the order of the columns and the position of the separator between fixed / scrollable columns.

A column can be defined as always being visible; e.g. the user is not allowed to hide such a column. That is accomplished by applying the Column Setting called "Always Visible".
A column can be defined to be locked; e.g. the user cannot re-arrange/change visibility of such column. That is accomplished by applying the Column Setting called "Locked".

The icon to launch the table configuration tool is located inside the Table Actions menu as seen in the screenshot below. If the table-chooser is configured to not being displayed, the button is placed in a different position.

image
Figure 34. Open the Table Configuration tool

When the table configuration tool is launched, a dialog is opened inside the side panel where the available columns are shown. The user may select or de-select the columns to be displayed, or rearrange the columns via drag and drop.

The selections are stored persistently in the same way as the last used combination of view/table/filters.

As of 6.3.0, columns can divided into groups using a common group header. A column inside such a group cannot be moved outside the group. However, the columns inside a group can be rearranged among each other. The group itself can also be re-arranged, but the columns inside a group will always be kept together.

Moreover, the user can create different personalized versions of a table and associate such a table profile with a name. When the user has defined one or more custom profiles, those will be available in the table-chooser.

image
Figure 35. Column Configuration Dialog

If the user has created a custom profile, those profiles will be shown in the table chooser as illustrated in the screen shot below:

image
Figure 36. Table chooser with table profiles

1.12. User Preferences

The pagination and table layout preferences are found via the preferences button in the toolbar, as seen below. This button can be made hidden via the page configuration settings.

As of 2011.1.0, the pagination settings are configured per instance of the structure browser and not a global setting as in earlier releases. See this chapter for details how to override the user settings.
image
  • Pagination settings

    • Paginate all pages or not (note: if the number of rows in the table exceeds the internal threshold, then pagination cannot be turned off.).

    • Items to display per page

  • Table layout settings

    • Standard / Optimized mode

    • Table header repeat interval (for optimized mode)

    • Look and feel of structure column

    • Position of expand/collapse buttons (left or right)

Preferences regarding table data export are found via the export button in the toolbar as shown below. The visibility of this button is specified via the page configuration settings.

image

1.12.1. Rules for determine the L&F of the Structure Browser

There are a couple of different ways how to configure the look and feel of the structure browser, for example via the user-preferences, the page-config object and via system default settings. The rules to determine the settings are defined below:

  1. If any of the parameters in the table below are defined within the page-config object, then the user preferences are NOT loaded unless there is another parameter that really defines that the user preference can replace the default setting.

    Parameter Parameter to force allow

    tableLayout

    allowTableLayoutChange=true

    structureGUI

    allowGUIChange=true

    navigationButtonPosition

    allowNavigationButtonPositionChange=true

    headerRepeatInterval

    allowHeaderRepeatChange=true

  2. If nothing is defined within the page configuration object, the user preferences are used.

  3. If nothing is defined within the page configuration object, and the user has NOT set any preferred values, then the system defaults are used.

    The system default values are controlled via these system-parameters (set in WEB.XML).

    Parameter System Setting Name Default Value

    tableLayout

    tvc.structurebrowser.tabelLayoutType

    Standard

    structureGUI

    tvc.structurebrowser.structureGUI

    Default

    navigationButtonPosition

    tvc.structurebrowser.structureGUI.navigationButtonPosition

    Right

    headerRepeatInterval

    tvc.structurebrowser.structureGUI.headerRepeatInterval

    12

1.12.2. Table Layout

The table layout that has been used in TVC since 3.0 has the freeze-pane functionality, e.g. the headers are fixed while scrolling vertically, and the left columns are fixed while scrolling horizontally.

This layout has the drawback that it needs some Java Script code to synchronize the tables, regarding column widths and row heights, after the data has been loaded to the browser.

Due to this, another table layout that lacks the freeze-pane functionality was added in TVC 5.2.0.

This table layout is now called "simple" or "optimized" layout, while the original layout is called "standard" layout. The selection of a layout is configurable, either by the user himself by using the preferences function, or configured by the configuration that controls a particular TVC browser instance (page-configuration object).

There is another setting for the simple/optimized table layout that controls the repeat interval of the headers.

1.12.3. Structure Column - Look & Feel

The column that displays the structure information can appear in a couple of different ways, which way is controlled via the user preferences dialog and/or configured by the administrator.

These different "modes" are usually something the end-user configures by himself, however, there are some ways to override these settings.

  • In the page configuration, add a parameter called "structureGUI".

    Example:

    <Parameter name="structureGUI" value="caret"/>

  • Specify a system default type via an init parameter called tvc.structurebrowser.structureGUI

    • The default structureGUI is the "default" across the application.

  • The possible values are "default", "wide", "wider", "widest", "high-contrast" and "caret".

Also, for some of the modes the expand/collapse button can be placed differently. The following settings controls this:

  • In the page configuration, add a parameter called "navigationButtonPosition". Example:

    <Parameter name="navigationButtonPosition" value="left"/>
  • Specify a system default type via an init parameter called tvc.structurebrowser.structureGUI.navigationButtonPosition. (default is right).

Arrows of Different Styles

There are a couple of different modes, which all are using arrows to display the structure information. The table below illustrates the different configuration combinations.

Structure GUI Type (structureGUI) Navigation Button Position (navigationButtonPosition)

Left

Right

default

strguidefaultleft

strguidefaultright

high-contrast

strguihcleft

strguihcright

wide

strguiwideleft

strguiwideright

wider

strguiwiderleft

strguiwiderright

Caret Navigation

In many modern applications structural information is presented in a really clean and simple way using only small triangles instead of lines and arrows. A presentation mode similar to Windows 8 Explorer has been added as of 2014.4.0 called "caret" navigation.

Below is an example screenshot illustrating this mode.

image
Figure 37. Caret Navigation
Type Image Size

If the type images are shown in the structure column, e.g. the navigation button position is left; the type images cannot be higher than 24 pixels.

If any images are higher than 24 pixels, a system setting must be set in order to use a slightly different approach when rendering the structure. This system setting is called tvc.structurebrowser.structureGUI.allowLargeTypeImages, which value should be true. When this setting is true, the layout will be slightly different than the picture above is showing.

If any type image is wider than 20px - which is the default max width, then one must configure this system setting to declare the widest width of such an image. This system setting is called tvc.structurebrowser.structureGUI.maxTypeIconWidth, which value should be an integer specifying the maximum width of the type-icon.

Configuring the Type Image

If the navigation buttons are placed on the left side, the type image is shown on the right side. These images could be configured to have a custom link, and if desired the link could have a custom target.

The parameters structure.typeImage.href and structure.typeImage.target controls this behaviour. These parameters are typically defined within the "TVC Custom Parameters" attribute on the "Page Configuration" object that is controlling the structure browser instance.

1.13. Arrow Key Navigation

In edit mode, the way to navigate through the editable fields has traditionally been done by using the TAB key or SHIFT+TAB key for moving in the opposite direction. However, the TAB key doesn’t allow the user to choose moving focus up/down and left/right.

In addition to this, it is now also possible to use the arrow keys to navigate through the editable fields. Moving focus with the arrow keys is only enabled for "text fields", and it is only possible to move from one "text field" to another "text field". If there are drop-down fields these will be skipped when navigating with the arrow keys. The image below illustrates how the usage of the arrow keys will move focus.

image
Figure 38. Arrow key navigation

When the arrow key navigation has been enabled, the only way to move the cursor inside a field is to hit the F2 key. Hitting the F2 key will temporarily disable the arrow key navigation within the current field. This is indicated by the colored border. To exit this mode, the user can click the escape button.

image
Figure 39. F2 Focus

Also, when arrow key navigation is enabled, you can use the ENTER/RETURN key to update the value without leaving the cell.

Arrow key navigation is enabled per page-configuration. Within the attribute "TVC Custom Parameters", add following

arrowKeyNavigation=true

The default value is false; however, to make the default value to TRUE, add the following init parameter.

<init-param>
    <param-name>tvc.structurebrowser.navigateWithArrowKeys</param-name>
    <param-value>true</param-value>
</init-param>

1.14. User Help

The TVC Structure Browser includes a built-in user help page. Unless you have configured the TVC Structure Browser to use another help page (using the HelpMarker parameter), the internal TVC help page will be displayed.

The internal help page contains general information on how to use the TVC Structure Browser features.

The help page is found from the icon shown below:

image

If you have defined the HelpMarker parameter, this will take precedence over the internal user help. If the HelpMarker is not set, TVC Structure Browser will show the help button and link to the internal help. This can however be disabled in two ways:

  1. Globally through an init parameter

    <init-param>
        <param-name>tvc.structurebrowser.internalHelpEnabled</param-name>
        <param-value>true | false</param-value>
    </init-param>
  2. Per Structure Browser instance (the value of the global parameter defines the default value) through a custom parameter

    showInternalHelp=true|false

1.14.1. Customizing the Help Pages

First of all, do not modify the existing help pages that exists in the folder "/tvc/structurebrowser/help". A better alternative is described below.

Basically, there are two types of customizations one might want to do:

  1. Translating the existing help pages to another language

  2. Add custom content to the existing help pages

If you only want to translate the pages, then you can add files in the /tvc/structurebrowser/help using the following name convention:

  • tvcHelp_en.jsp

  • tvcHelp_sv.jsp

  • tvcHelp_de.jsp

E.g. what you do is adding the locale to the file name, before the suffix.

The existences of available locale specific pages are cached in TVC, so if you add a page at runtime - clear the TVC cache. (This is just needed first time the page is added, no need to clear the cache if you modify the existing file).

If you want to change the page completely, then you should apply a system parameter (in web.xml) that points out a different JSP page. Add the below to the tvc-servlet definition:

<init-param>
    <param-name>tvc.structurebrowser.helpPage</param-name>
    <param-value>/path/to/HelpPage.jsp</param-value>
</init-param>
Your custom page can still include the pages that are used by the original help page.

1.15. Structure Compare

Comparing structures is a common requirement in different product lifecycle stages. There is also a common need to be able to visualize the comparison results in a graphical manner and share this information effectively.

The Structure Compare is a configurable tool that incorporates the functionality needed for comparing large structures in a user-friendly manner.

The main features of the Structure Compare are:

  • Two pane navigation view of source and target structures with synchronized scrolling & expansion/collapse.

  • Visual indicators to indicate differences in the structure such as additions, removals, modifications & presence of different child objects.

  • Differences between two objects can be visualized in either quick preview through tooltip or a more detailed view.

  • Possible to filter the comparison results to present different views such as only different elements, only common elements or the complete structure.

  • Easy inspection and navigation through the structural differences with buttons as well as keyboard shortcuts.

  • Export of comparison results into Excel with the visual indicators.

1.15.1. Usage Scenarios

Select Source and Target structures for comparison

The compare is launched in context of the source object. The source object is either selected in a table or implicitly defined by the contextual object.

A search form configuration will be used to find and select the target object. Revisions of the source object will automatically be populated to the target object select list.

image
Compare result view

The comparison result is shown in a two pane view with the source structure on the left and the target structure on the right.

image
Visual indicators for showing differences
Object added

When an object occurs in the target structure but not in the source structure it is displayed with green background in the right pane. The corresponding row in the source pane is left empty.

An object added is determined by a no match of a row in the target structure defined by statements defined in the key element.

image
Object removed

When an object occurs in the source structure but not in the target structure it is displayed with green background in the left pane. The corresponding row in the target pane is left empty.

An object removed is determined by a no match of a row in the source structure defined by statements defined in the key element.

image
Object difference

When an object occurs in both the source and target structures it is displayed with a red background in both panes.

An object difference is determined by a match of an object from source and target structures defined by statements defined in the key element when there is a mismatch of the comparison selects for the objects defined by the table element.

image
Existence of different children within the structure

When there is a difference detected somewhere in the structure below, an arrow is added to the left of the row.

image
Visualization of object difference information
Object differences

If an object difference is detected, all differences defined by the table element will be available through a tooltip displayed on mouse over the difference icon. Note that the differences table might contain other columns than the table used for display.

image
Detailed view of object differences

When clicking the difference icon a detailed view of the object differences will appear in a popup. The detailed view will dynamically display all attributes and basics with all the changes highlighted.

image
Filter comparison result

In the filter select list you can define what should be displayed in the structure. The differences choice will remove rows without any difference unless they contain different children.

image
Easy inspection and navigation of the structural differences

It is possible to inspect the structural differences one by one & navigate them through Buttons or Keyboard shortcuts (<Alt + Up>, <Alt Down>).

image
image

1.15.2. Configuring and Extending the Structure Compare

The URL to initiate the Structure Compare is

${ROOT_DIR}/tvc-action/compare

The above URL accepts the following parameter(s).

URL Parameter Description Examples

config

Name of the Structure Compare Configuration XML file.

See details on using the structure compare configuration XML below for more information

config=tvc:compare:tvx:enc/EBOM.xml

searchConfig

Name of the search configuration to use for finding and selecting the target object.

searchConfig=tvc:searchconfig:tvx:enc/AddPart.xml

1.15.3. Structure Compare Configuration XML

The comparison configuration is as mentioned above stored in an XML resource. This file defines how the comparison should be done and how the result is displayed.

The example table below illustrates how to define the XML based configuration.

<?xml version="1.0" encoding="UTF-8"?>
<Compare>
    <Header>EBOM</Header>
    <SubHeader>Compare</SubHeader>
    <Filter>All</Filter>
    <Sources>
        <Enovia>
            <Table>tvc:table:tvx:enc/compare/EBOM.xml</Table>
            <Level>0</Level>
	    <From />
            <Type>type_Part</Type>
            <Type>type_DOCUMENTS</Type>
            <Relationship>relationship_EBOM</Relationship>
            <Relationship>relationship_PartSpecification</Relationship>
            <Relationship>relationship_ReferenceDocument</Relationship>
        </Enovia>
        <Enovia>
            <Table>tvc:table:tvx:enc/compare/EBOM.xml</Table>
            <Level>0</Level>
	     <To />
            <Type>type_Part</Type>
            <Type>type_DOCUMENTS</Type>
            <Relationship>relationship_EBOM</Relationship>
            <Relationship>relationship_PartSpecification</Relationship>
            <Relationship>relationship_ReferenceDocument</Relationship>
        </Enovia>
    </Sources>
    <Keys>
        <Key relationship="relationship_EBOM">
            <Field appliesToRel="true"><![CDATA[$<attribute[attribute_FindNumber].value>]]></Field>
        </Key>
        <Key relationship="*">
            <Field appliesToRel="false">type></Field>
            <Field appliesToRel="false">name</Field>
            <Field appliesToRel="false">revision</Field>
            <Field appliesToRel="true">type</Field>
        </Key>
    </Keys>
    <Tables>
        <Table>tvc:table:tvx:enc/compare/Comparison.xml</Table>
    </Tables>
    <EnoviaDetailedComparisonProvider />
</Compare>
<Header>EBOM</Header>

Sets the header for the comparison result view

Sub Header
<SubHeader>Compare</SubHeader>

Sets the sub header for the comparison result view

Filter
<Filter>All</Filter>

Set the default filter to be used for the compare result. Valid values for this setting are:

  • All (shows the entire structure)

  • Common (shows common rows)

  • Differences (shows rows with differences)

Sources
<Sources>
    <Enovia>
        <Table>tvc:table:tvx:enc/compare/EBOM.xml</Table>
        <Level>0</Level>
        <Type>type_Part</Type>
        <Type>type_DOCUMENTS</Type>
        <Relationship>relationship_EBOM</Relationship>
        <Relationship>relationship_PartSpecification</Relationship>
        <Relationship>relationship_ReferenceDocument</Relationship>
    </Enovia>
    <Enovia>
        <Table>tvc:table:tvx:enc/compare/EBOM.xml</Table>
        <Level>0</Level>
        <Type>type_Part</Type>
        <Type>type_DOCUMENTS</Type>
        <Relationship>relationship_EBOM</Relationship>
        <Relationship>relationship_PartSpecification</Relationship>
        <Relationship>relationship_ReferenceDocument</Relationship>
    </Enovia>
</Sources>

Defines how the comparison result will be shown. The first <Enovia> element defines the source structure and the second <Enovia> element defines the target structure.

  • The <Table> element defines what table definition to be used to display the structure

  • <Level> defines how many levels down to expand the root node. 0 = Infinite

  • <From /> defines if the expansion is made in the from direction. Default is false.

  • <To /> defines if the expansion is made in the to direction. Default is false.

  • <Type> defines what types to show

  • <Relationship> defines what relationships to use for expanding the structures

Keys
<Keys>
    <Key relationship="relationship_EBOM">
        <Field appliesToRel="true"><![CDATA[$<attribute[attribute_FindNumber].value>]]></Field>
    </Key>
    <Key relationship="*">
        <Field appliesToRel="false">type></Field>
        <Field appliesToRel="false">name</Field>
        <Field appliesToRel="false">revision</Field>
        <Field appliesToRel="true">type</Field>
    </Key>
</Keys>

The <Key> elements are used for indentifying and matching rows during the compare. It will compare all nodes in the two structures and try to match them based on the defined keys. You can have several keys that compare different relationships and different values, <Field>. If two objects are found that matches a key and its fields those objects will be considered as a "match" in the compare. If no match is found, defined by key for an object, it will be displayed as either "Removed" or "Added".

Tables

The table element defines what table to be used for the actual object compare when a match is found. The compare will use all the column expressions in this table to compare the differences between two matched objects.

<Tables>
    <Table>tvc:table:tvx:enc/compare/Comparison.xml</Table>
</Tables>

Below is an example of how a compare table can be defined in XML. With this example the compare will mark two objects as modified if one or more of below expressions return different values for the compared objects.

<?xml version="1.0" encoding="UTF-8"?>
<Table>
    <Column usesBusinessObject="false">
        <Expression>$&lt;attribute[attribute_Quantity].value&gt;</Expression>
    </Column>
    <Column>
        <Expression>type</Expression>
    </Column>
    <Column>
        <Expression>name</Expression>
    </Column>
    <Column>
        <Expression>revision</Expression>
    </Column>
    <Column>
        <Expression>description</Expression>
    </Column>
</Table>
ENOVIA Detailed Comparison Provider

The <EnoviaDetailedComparisonProvider /> element enables the "Detailed Compare" button in the compare result. Clicking this button will give you a detailed compare of ALL attributes and basics on the selected objects.

1.16. Wrap Content

The Wrap Content feature can be used to wrap or unwrap table content. This can be enabled globally using init-param tvc.structurebrowser.visible.wrap. By default it is disabled.

<init-param>
    <param-name>tvc.structurebrowser.visible.wrap</param-name>
    <param-value>true</param-value>
</init-param>

Alternatively, it can be enabled at page config level by using visible setting as shown below -

<PageConfig>
.
.
.
<Visible wrap="true" />
.
</PageConfig>

There are two separate buttons to toggle between wrap or unwrap table content, only one is visible at a time depending on whether contents are wrapped or unwrapped. When table contents are wrapped, unwrap button is visible and when table contents are unwrapped, wrap button is visible.

Contents are unwrapped:

image

Contents are wrapped:

image

User selection is remembered for each table. By default contents are wrapped.

Note

When table column width is resized and unwrap is selected, text is truncated with ellipses to fit column size available.