Use this property to disable the auto registration
23 June 2016
You may want to receive messages from a Rabbit MQ message broker. This page describes how to set-up a so called RabbitMQ Message Receiver in TIF allowing you to do so.
You can set-up several RabbitMQ listeners, each will then listen to different queues or topics.
The preferred way of configuring such listener is to use the XML configuration format.
E.g. adding a file within the directory ${TIF_ROOT}/modules/enovia/cfg/rabbitmqlistener
.
By default, this directory is scanned upon start-up and all configured listeners therein will be registered automatically.
You can configure this behaviour within ${TIF_ROOT}/modules/enovia/etc/module.custom.properties
via the following properties:
Property | Type | Default | Description |
---|---|---|---|
resources.rabbitmqlistener.autoRegister |
boolean |
True |
Use this property to disable the auto registration |
resources.rabbitmqlistener.excluded |
Comma separated list |
Comma separated list of resources to be excluded. |
|
resources.rabbitmqlistener.included |
Comma separated list |
Comma separated list of resources to be included. |
By default, auto registration is enabled and no resources are excluded.
The root element is <AMQPListener>
. The table below lists the allowed child elements
Element | Required | Description | Example |
---|---|---|---|
|
Yes |
Defines a user friendly name of this configuration |
|
|
Yes |
Defines what destination to listen from |
|
|
No |
Defines if to establish an ENOVIA context |
|
|
Yes |
Defines the handler containing your businesslogic that is processing the message |
|
|
No |
Some handlers might accept arguments. |
|
The <WithContext>
element supports the following attributes.
Attribute | Required | Description |
---|---|---|
user |
No |
If omitted, the super user will be used |
securityContext |
No |
Defines the security context to be used |
useDefaultSecurityContext |
No |
If set to true, the default security context for the user will be used. The used user must have a default security context otherwise an error will be raised. |
The <Handler>
element supports one of these three attributes
The name of a class implementing com.technia.tif.enovia.rabbitmq.MessageReceiver
. See chapter below.
Name of a script resource. Example: script="tvc:script/MyMessageReceiver.js"
. See chapter below.
Name of a pre-defined type. Example: type="SomePredefinedType"
Example configuration:
<tif:AMQPListener
xmlns:tif="http://technia.com/TIF/AMQPListener"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://technia.com/TIF/AMQPListener file:///C:/apps/tif-server/modules/enovia/schema/AMQPListener.xsd">
<tif:Name>Test Listener</tif:Name>
<tif:Destination id="part-from-erp" />
<tif:WithContext />
<tif:Handler className="com.acme.integrations.part.DefaultMessageReceiver" />
</tif:AMQPListener>
You can change a definition at runtime, but you need to restart the corresponding service activator from within the Administration UI in order to pick up the changes. |
Currently, there is no support for adding new or deleting existing definitions at runtime. Such change requires a restart of the TIF server in order to reflect the new state. |
The recommended way of registering a Rabbit-MQ listener is to use the XML configuration format as described in the previous chapter.
However, you may still register a listener from with the module properties file.
E.g. using the file ${TIF_ROOT}/modules/enovia/etc/module.custom.properties
.
Below is an example configuration:
rabbitmqListener.0.enabled = true rabbitmqListener.0.className = com.technia.tif.enovia.rabbitmq.TestReceiver rabbitmqListener.0.destination = rabbitmq-1 rabbitmqListener.0.context = true rabbitmqListener.0.name = Service Name
The prefix of a RabbitMQ listener is rabbitmqListener.<ID>.
where <ID>
is a unique identifier containing only letters and/or digits.
The available property suffices are shown in the table below.
Property Suffix | Description | Required |
---|---|---|
enabled |
Defines if the directory listener should be enabled or not. |
No. Default is true |
destination |
The ID of a RabbitMQ destination defined in the "destination.xml" file. See Configure Destinations for details how to register destinations. |
Yes |
context |
A boolean value indicating if an ENOVIA context object should be allocated when the message receiver is invoked. |
No. Default is false. |
context.user |
An optional name of a ENOVIA™ user (used if context = true). May be omitted to indicate that the default ENOVIA system-user should be used. |
No. Defaults to the system user. |
context.securityContext |
Specify ENOVIA securtity context. |
No |
context.useDefaultSecurityContext |
Specify to use the default securtity context on the user. |
No |
name |
Name of the service. Used in the Admin UI. |
No. |
className |
Defines a fully qualified class name of a Java class that implements "com.technia.tif.enovia.rabbitmq.MessageReceiver". See below. |
One of the attributes className or script must be defined. |
script |
A script that implements the same functionality as a corresponding Java class. See below. |
The Java class pointed out via the className
attribute must implement the interface MessageReceiver in TIF. This API looks like:
package com.technia.tif.enovia.rabbitmq;
/**
* This interface must be implemented to handle messages received by RabbitMQ
* listener.
*
* @since 2015.3.0 Initial version
* @since 2020.2.0 Refactored to support better message control
*/
public interface MessageReceiver {
/**
* Called when a new message appears.
*
* @param msg The message to handle
* @return The result of the operation. Depending on the result, the message
* will either be acknowledged (with multiple flag set or not),
* not-acknowledged (rejected) (with multiple flag set or not) or
* nothing is done.
* @throws Exception If a failure occurs.
*/
Result onMessage(Message msg) throws Exception;
/**
* If an exception occurs, this method is called. The default implementation
* does nothing and returns a {@link Result#NACK} value.
*
* @param e The exception
* @param msg The message
*/
default Result onException(Exception e, Message msg) {
return Result.NACK;
}
}
The return value enum constants are described below.
Do nothing
Acknowledges the current message
Rejects the current message
Rejects the current message and requeues it
Acknowledges multiple messages, e.g. all messages that have not yet been ack/nack’ed
Rejects multiple messages.
Rejects multiple messages and requeues all.
Instead of implementing the MessageReceiver as a traditional Java class you may implement this in a script file.
Scripts are stored and handled similar to any other configuration resource file, e.g. below the cfg folder.
The scripts goes into the folder script
, e.g. ${TIF_HOME}/modules/enovia/cfg/script
.
You may also use domains, as for the other configuration files. See below:
Examples:
rabbitmqListener.TEST.script = RabbitMQListener.js (1) rabbitmqListener.TEST.script = tvc:script/RabbitMQListener.js (2) rabbitmqListener.TEST.script = tvc:script:domain/RabbitMQListener.js (3)
1 | refers to the file cfg/script/RabbitMQListener.js |
2 | refers to the file cfg/script/RabbitMQListener.js |
3 | refers to the file cfg/domain/script/RabbitMQListener.js |
The script you write must implement "onMessage" and "onException" methods.
Example:
function onMessage(msg) {
// Logic goes here.
return com.technia.tif.enovia.rabbitmq.Result.ACK;
}
//Override if needed to handle exception
//function onException(e, msg) {
//
// return com.technia.tif.enovia.rabbitmq.Result.NACK;
//}